![](/images/new-backgrounds/1041981/4198129x1.webp)
3.Fit and secure six burner rings using M4 screws on rear left hand, front centre, front right hand and rear right hand burners. Use No.6 3/8 screw on front left hand and centre rear burners. (See Fig. 6C).
NOTE: The fitting of LH and centre burners are the same as shown in Fig. 6B.
Fig. 6C | DESN 512419 |
4. Position burner caps onto burner bodies. (See Figs. 7A, 7B & 7C)
ULTRA RAPID BURNER
Fig. 7A | DESN 512920 |
15