![](/images/new-backgrounds/1041981/4198117x1.webp)
CONNECTING TO GAS
CAUTION: ENSURE THAT THE COOKER IS ISOLATED FROM ELECTRIC SUPPLY
The cooker can be installed with an approved flexible connection. Supply piping should not be less than 3/8 I/D Flexiline. Connection is made to the 1/2” NPT female threaded elbow located just below the hotplate level on the right hand side of the cooker.
Fig. 3 | DESN 512639 |
The gas flexiline connector must be fitted in the shaded area dimensioned in Fig. 3. Take into account that it must be possible to pull the cooker forward sufficiently for servicing. Ensure flexiline hose is not trapped between cooker back panel and rear wall. Ensure hose is routed within the shaded area and away from shielded oven vent.
NOTE: Use soapy water solution on new gas connections to ensure there are no gas leaks.
NOTE: AN EASILY ACCESSIBLE MANUAL SHUT GAS VALVE MUST BE FITTED BEFORE THE METAL FLEX GAS LINE.
Check for gas soundness after connecting the appliance.
9