Transition Networks RS-232-TO-100BASE-FX manual Equipment, or injury to persons, Performance

Transition Networks SDSFE31xx-100 Industrial Device Server

Cautions and warnings

Cautions and	Make sure that you read and understand all content identified by these two symbols:
warnings
	Cautions and warnings appear here and throughout this manual where appropriate.
	Failure to read and understand the information identified by the “caution” and
	“warning” symbols could result in poor equipment performance, damage to
	equipment, or injury to persons.
Cautions
	Cautions indicate the possibility of damage to equipment.
	CAUTION
	Make sure that the Device Server is mounted with proper space around it for
	ventilation (heat dissipation). Failure to observe this caution could result in
	damage to the Device Server.
	CAUTION
	Please exercise caution when using power tools. Do not install this unit in damp
	or wet locations, or in close proximity to very hot surfaces. Failure to observe
	this caution could result in damage to the Device Server and cables.
	CAUTION
	Only qualified persons should install the Device Server. Failure to observe this
	caution could result in poor performance or damage to the Device Server.
	CAUTION
	Install the Device Server in an environment where the temperature range is from
	0ºC to 70ºC (32º to 158º F), with relative humidity of 5% to 90%, non-
	condensing. Failure to observe this caution could result in poor Device Server
	performance.
	CAUTION
	DO NOT install the Device Server in areas where strong electromagnetic fields
	(EMF) exist. Failure to observe this caution could result in poor Device Server
	performance and data corruption.
	CAUTION
	The Device Server must be mounted to a well-grounded surface. Failure to
	observe this caution could result in EMI problems.
	Continued on next page

viii 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600