Transition Networks |
|
Creating virtual COM ports, continued
Virtual COM Alternatively, you can edit the COM port ranges directly. Use individual COM port
port creation numbers (such as 4, 5, 7) and/or ranges of numbers (such as
COM Port To configure virtual COM ports, do the following: configuration
Step | Action |
1.On the control panel, click the SELECT PORTS button to bring up the “select ports” dialog box shown in Figure 54.
Figure 54: Select Ports Dialog Box
Note: You can select up to 4,096 virtual COM ports. COM1 and COM2 are normally physical ports, so they will not appear in the dialog box.
2.Select a virtual COM port from the list (COM7 in this example). The COM port selection will appear in the lower panel of the select port dialog box.
3.Click the OK button to establish COM port 7.
Continued on next page
52 |