Transition Networks SDSFE31XX-100 Fiber cable and optic specifications, ParameterSpecification

Page 73

SDSFE31xx-100 Industrial Device Server

Transition Networks

Fiber cable and optic specifications

Fiber cable Cable physical characteristics must meet or exceed IEEE 802.3™ specifications. characteristics

ParameterSpecification

	Bit Error Rate:	<10-9
	Single mode fiber:	9 µm
	Multimode fiber:	62.5/125 µm
	Multimode fiber:	100/140, 85/140, 50/125 µm

Fiber optic The following shows the fiber optic specification: specifications

	Fiber Cable	Specifications
	SDSFE3111-100	1300 nm multimode
	Fiber-optic transmitter power:	min: -19.0 dBm max: -14.0 dBm
	Fiber-optic receiver sensitivity:	min: -31.0 dBm max: -4.0 dBm
	Link budget:	12.0dB
	SDSFE3113-100	1300 nm multimode
	Fiber-optic transmitter power:	min: -19.0 dBm max: -14.0 dBm
	Fiber-optic receiver sensitivity:	min: -31.0 dBm max: -4.0 dBm
	Link budget:	12.0dB
	SDSFE3114-100	1310 nm single mode
	Fiber-optic transmitter power:	min: -15.0 dBm max: -3.0 dBm
	Fiber-optic receiver sensitivity:	min: -30.0 dBm max: -3.0 dBm
	Link budget:	15.0 dB
	SDSFE3115-100	1310 nm single mode
	Fiber-optic transmitter power:	min: -15.0 dBm max: -8.0 dBm
	Fiber-optic receiver sensitivity:	min: -34.0 dBm max: -7.0 dBm
	Link budget:	19.0 dB
	SDSFE3117-100	1550 nm single mode
	Fiber-optic transmitter power:	min: -3.0 dBm max: 3.0 dBm
	Fiber-optic receiver sensitivity:	min: -37.0 dBm max: 0.0 dBm
	Link budget:	34.0 dB

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

61

Image 73

Contents Page Page Table of Contents Transition Networks Iii Intentionally Blank CE Mark Trademark Copyright restrictions FCC warningMay be required to take adequate preventative measures About this product and manual About this product and manual Box contents The box should include the followingEquipment, or injury to persons Observe this caution could result in EMI problemsDamage to the Device Server PerformanceSDSFE31xx-100 Industrial Device Server Transition Networks Intentionally Blank This section These are the topics Section SDSFE31xx-100 Industrial Device ServerTopic SeeGeneral description FeaturesOverview Standard SDSFE31xx-100 Industrial part numbersParts Physical descriptionFunctions FunctionsDevice server parts and functions Physical descriptionIntentionally Blank This section Section InstallationThese are the topics Topic SeeDevice Service mounting location Mounted DIN Rail Clip DIN rail clip and DIN rail mountingStep Action DIN rail clip and DIN rail mountingDevice Server Grounding Screw Grounding the Device ServerRedundant Power Connections Connecting power to the Device ServerTurn the external power source OFF Connecting power to the Device ServerStrip the power wires as required Polarity. See FigureWired Terminal-Block Plug Inserted Into Device Server Terminal-block plug wiring Step ActionAlarm Relay Contacts Connecting an alarm fixtureFault Connecting an alarm fixtureIndications Fiber Cable Connections Connecting fiber cablesInstallation Connecting DB-9 cableSection for DB-9 cable pinouts DB-9 cableDip Switch Settings and Explanations DIP SwitchesIntentionally Blank Section Operations LEDs Light emitting diodes LEDsLogin Dialog Box Device Server configurationWeb access Device Server configurationSystem Restart Configuration softwareSystem information submenu Master information submenu Configuration softwareSerial Port Transfer Configuration Submenu Display Configuration menu optionsSerial Device Connection to a Host via Ethernet Network Serial port config submenu Submenu Item DescriptionSerial Tunneling Submenu Item Description RS-232 Port Connection Status Submenu DisplaySubmenu User configSee Figure Firmware Upgrade Submenu Http Firmware File Name Captured FW upgrade via Http Step ActionIndex Page System information Display FW upgrade via HttpFW upgrade via Tftp Step Action Configuration System Backup File Display Backup File Restore Display Snmp Communities Display Snmp configuration menu Snmp communities submenuIP Trap Parameters and Descriptions Describes the fields on the IP Trap Manager displayIP trap manager submenu System Restore System restoreReset Will be erasedIntentionally Blank Section Section Serial IP Redirector SoftwareThis are the topics Serial IP redirect software description Needed? Step Action What isInstallation Wizard Dialog Box Installing serial IP redirector softwareSoftware Destination Folder Dialog Box Installing serial IP redirector softwareSelect Features Dialog Box Ready to Install Application Dialog Box Step Action Upgrading serial IP redirector software Software upgradesSerial IP Control Panel Dialog Box Creating virtual COM portsSelect Ports Dialog Box Creating virtual COM portsVirtual Port Configuration COM Port 7 Configuration Wizard If the wizard Setting button will be active. See FigureFails If the wizard isSerial/IP Port Monitor If the wizard is successful Step ActionTroubleshooting problem and corrective action table Section TroubleshootingIntroduction Problem Potential Cause Potential Solution Troubleshooting problem and corrective action tableThis section provides copper and fiber cable specifications Section Cable SpecificationsWhat is RS-232 Copper DB-9 RS-232serial cable specificationsSpecifications PinoutsParameterSpecification Fiber cable and optic specificationsFiber Cable Specifications Intentionally Blank Section Contact Us, Warranty Conformity Information Contact us Declaration of Conformity Conformity declarationWarranty Warranty Compliances Compliance informationRegulations CanadianAccordance with European Union Directive 2002/96/EC Compliance informationPortion of this document To the Public Telephone NETWORK. Failure to observe thisIntentionally Blank SDSFES31xx-100 specifications, notices, and warnings Appendix a Technical SpecificationParameter Description Subchapter J applicable at the date of manufacture SDSFES31xx-100 specifications, notices, and warningsCould result in damage to equipment This warning could result in an eye injury or blindnessIndex COM Port ConfigurationPacket Mode