Transition Networks SDSFE31XX-100 manual System restore, System Restore, Reset, Will be erased

Page 53

SDSFE31xx-100 Industrial Device Server

Transition Networks

Configuration software, continued

System restore	Click the System Restart link to show the Restart submenu options:
submenu	•	System Restore

	•	Reset
	Note: You can “restore” or “reset” the Device Server remotely via software.
System restore
	Click the RESTORE button, shown in Figure 42, to set the Device Server back to
	factory defaults. After the timeout display disappears all saved configuration data
	will be erased.

Figure 42: System Restore Button

System reset Click the RESET button, shown in Figure 43, to reset the Device Server. After the timeout disappears the system will be reset, but all configuration data will be maintained (IP address, etc.).

Figure 43 System Reset Button

Note: System Reset has the same functionality as power cycling the Device Server.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

41

Image 53

Contents Page Page Table of Contents Transition Networks Iii Intentionally Blank May be required to take adequate preventative measures Trademark Copyright restrictions FCC warningCE Mark About this product and manual About this product and manual Box contents The box should include the followingEquipment, or injury to persons Observe this caution could result in EMI problemsDamage to the Device Server PerformanceSDSFE31xx-100 Industrial Device Server Transition Networks Intentionally Blank This section These are the topics Section SDSFE31xx-100 Industrial Device ServerTopic SeeOverview FeaturesGeneral description Standard SDSFE31xx-100 Industrial part numbersParts Physical descriptionFunctions FunctionsDevice server parts and functions Physical descriptionIntentionally Blank This section Section InstallationThese are the topics Topic SeeDevice Service mounting location Mounted DIN Rail Clip DIN rail clip and DIN rail mountingStep Action DIN rail clip and DIN rail mountingDevice Server Grounding Screw Grounding the Device ServerRedundant Power Connections Connecting power to the Device ServerTurn the external power source OFF Connecting power to the Device ServerStrip the power wires as required Polarity. See FigureWired Terminal-Block Plug Inserted Into Device Server Terminal-block plug wiring Step ActionAlarm Relay Contacts Connecting an alarm fixtureIndications Connecting an alarm fixtureFault Fiber Cable Connections Connecting fiber cablesInstallation Connecting DB-9 cableSection for DB-9 cable pinouts DB-9 cableDip Switch Settings and Explanations DIP SwitchesIntentionally Blank Section Operations LEDs Light emitting diodes LEDsLogin Dialog Box Device Server configurationWeb access Device Server configurationSystem Restart Configuration softwareSystem information submenu Master information submenu Configuration softwareSerial Port Transfer Configuration Submenu Display Configuration menu optionsSerial Device Connection to a Host via Ethernet Network Serial port config submenu Submenu Item DescriptionSerial Tunneling Submenu Item Description RS-232 Port Connection Status Submenu DisplaySee Figure User configSubmenu Firmware Upgrade Submenu Http Firmware File Name Captured FW upgrade via Http Step ActionIndex Page System information Display FW upgrade via HttpFW upgrade via Tftp Step Action Configuration System Backup File Display Backup File Restore Display Snmp Communities Display Snmp configuration menu Snmp communities submenuIP Trap Parameters and Descriptions Describes the fields on the IP Trap Manager displayIP trap manager submenu System Restore System restoreReset Will be erasedIntentionally Blank This are the topics Section Serial IP Redirector SoftwareSection Serial IP redirect software description Needed? Step Action What isInstallation Wizard Dialog Box Installing serial IP redirector softwareSoftware Destination Folder Dialog Box Installing serial IP redirector softwareSelect Features Dialog Box Ready to Install Application Dialog Box Step Action Upgrading serial IP redirector software Software upgradesSerial IP Control Panel Dialog Box Creating virtual COM portsSelect Ports Dialog Box Creating virtual COM portsVirtual Port Configuration COM Port 7 Configuration Wizard If the wizard Setting button will be active. See FigureFails If the wizard isSerial/IP Port Monitor If the wizard is successful Step ActionIntroduction Section TroubleshootingTroubleshooting problem and corrective action table Problem Potential Cause Potential Solution Troubleshooting problem and corrective action tableThis section provides copper and fiber cable specifications Section Cable SpecificationsWhat is RS-232 Copper DB-9 RS-232serial cable specificationsSpecifications PinoutsFiber Cable Specifications Fiber cable and optic specificationsParameterSpecification Intentionally Blank Section Contact Us, Warranty Conformity Information Contact us Declaration of Conformity Conformity declarationWarranty Warranty Compliances Compliance informationRegulations CanadianAccordance with European Union Directive 2002/96/EC Compliance informationPortion of this document To the Public Telephone NETWORK. Failure to observe thisIntentionally Blank Parameter Description Appendix a Technical SpecificationSDSFES31xx-100 specifications, notices, and warnings Subchapter J applicable at the date of manufacture SDSFES31xx-100 specifications, notices, and warningsCould result in damage to equipment This warning could result in an eye injury or blindnessIndex COM Port ConfigurationPacket Mode