Kenmore 790.7752, 790.7753, 790.7754, 790.7751 manual When the Self-Clean cycle is done

Self=Cleaning

•Setting Flex Clean or Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Self-Clean cycle is done:

1.The time of day, "HOT", "DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7).

2.Once the oven has cooled down for approximately 1 HOUR, and

the "DOOR LOCKED" icon is no longer displayed, the oven	Fig.7
door can then be opened.

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door	Fig.8
can then be opened (See Fig. 8).

iMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON (if equipped).

2.A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see the instructions to set the control for the 24 hour time of day display mode.

iii...........

iiiiiii:::¸J!i:Z

35