Self- Cleaning
•Setting Flex Clean or Delay Flex Clean
The FLEX CLEAN (,_,_) pad is used to start a
hours and 50 minutes)by pressing the number keypads _2_5_.0_.
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the
INSTRUCTIONS | PRESS | DISPLAY |
To start an immediate Self=Cleaning cycle or to set a Delay Start time of 9:00 o'clock and shut=off automatically (example provided is a default 3 hour Self=Clean cycle):
1.Be sure the clock is set with the correct time of day, the oven is EMPTY and the oven door is closed.
2.Press _,. "CLEAN" will flash, "3:00" (hours)will show in the
display (See Fig. 1).
(_)(:_)(_)(2 hours)through(4
hours) in one minute increments. You may also skip the time entry and accept the default cleaning time of 3 hours by pressing the START key pad (See Step 3).
3.Press _T/,_ .The"DOOR LOCKED" icon will flash; "CLEAN" and the letters "CLn" will remain on in the display (See Fig. 2).
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will quit flashing and remain on (See Fig. 3).
Fig. 1
2:00 thru 4:00 using number pads
Fig. 2
Fig. 3
NOTE: If the optional delay Self=Clean feature is needed, finish steps 5=7. If Self=Clean is started immediately skip the remaining steps and continue with "When the Self=Clean cycle is done" on the following page.
5.Press (,,_ (See Fig. 4). Enter the desired
| time using the number pads @@@ | (See Fig. 5). | |
|
|
| Fig. 4 |
6. | Press _. | "CLn" icon will turn off; "DELAY", | "DOOR |
| LOCKED" and "CLEAN" will remain on. |
| |
7. | The control | will calculate forward from the set start time to | |
| determine when the | ||
|
|
| Fig. 5 |
Cleaning cycle will turn on automatically at the set time. At that time the icon "DELAY" will go out; the oven icon will come on, the start time, "CLEAN" and "CLn" will remain in the display (See Fig. 6).
Fig. 6
34