Category 2 & 3 Quick Hitches

2.Insert lower hitch pins to Position A, Figure 2, through mast plates and tractor lower lift arms.

3.Secure with lynch pins.

4.Attach top link for mounted units in the top hole of upper mast using top link pin.

1.Position lower hitch pins to Position A, Figure 2.

2.Use the upper hole that matches upper quick hitch point location. This is usually the lower hole for Category 2 and the middle hole for Category 3.

3.Secure with lynch pins.

4.Attach tractor to cutter and secure hitch according to hitch manufacturer’s instructions.

DRIVELINE ADJUSTMENT (MOUNTED)

Attach the cutter to the tractor 3-point hitch (or quick hitch if available). Do not attach driveline at this time.

NOTICE

■If attaching cutter using a Quick Hitch the dis- tance between the tractor PTO and the gearbox input shaft will increase. Follow steps as you would for the 3-point hitch to insure proper engagement.

Raise and lower cutter and measure the maximum and minimum distance between the tractor PTO shaft and the gearbox input shaft. Separate the driveline into two halves and lay them side-by-side with U-joints at oppo- site ends.

Set the two U-joints at the maximum distance mea- sures (this is the cutters lowest point of operation) and check the amount of overlap between the two drive halves. There must be at least 4 inches of overlap. If the driveline is too short (less than 4" overlap), contact your Woods dealer for a longer drive.

Shorten Driveline

1.Separate driveline into two halves and connect them to the tractor PTO and gearbox input shaft.

2.Place the two halves parallel to one another to determine how much the driveline must be shortened. See Figure 4 for example.

Figure 4. Drive Halves Placed Parallel

3.Measure from the end of the upper shield to the base of the bell on the lower shield (A). Add 1- 9/16" to dimension (A). See Figure 5.

1-9/16"

DP3

Figure 5. Determine Shield Length

4.Cut the shield to the overall dimension (Figure 6).

Figure 3. 4 Inch Minimum Overlap

Set the two U-joints to the minimum distance measured (this is the cutter’s highest point) and check to see if the driveline bottoms out. If driveline is too long, follow the instructions to shorten the drive.

DP4

Figure 6. Cut Shield

16 Operation	MAN0577 (6/29/2007)

TS1680, TS1680Q specifications

Woods Equipment has long been a prominent name in the agricultural and landscaping sectors, and its TS1680Q and TS1680 models further cement this reputation. Designed for versatility and reliability, both models shine in various applications, ranging from mowing to maintaining landscapes.

One of the standout features of the Woods TS1680Q and TS1680 is their robust build quality. Crafted with heavy-duty materials, these models are engineered to withstand the rigors of tough terrain and demanding workloads. The TS1680Q, being the quieter variant, employs advanced sound-dampening technologies, ensuring that operators can work without the disruptive noise typical of many competitors.

With a cutting width of 68 inches, both models are designed for efficiency. The wide cutting deck not only allows operators to cover more ground quickly but also ensures a clean and even cut on various grass types. The TS1680Q further enhances mowing precision with its unique floating deck design. This feature enables the cutting deck to follow ground contours, reducing scalping on uneven surfaces.

Another notable characteristic is the versatility of attachment options. Both models come equipped with a category 1 three-point hitch which allows for easy attachment of numerous implements. This adaptability means operators can use the TS1680Q and TS1680 for other tasks, such as tilling or hauling, making it a multi-functional powerhouse for any farm or landscape project.

The hydraulic system on these models is engineered for high performance. With user-friendly controls and responsive feedback, operators can adjust settings with ease. Combined with a powerful engine, the TS1680Q and TS1680 offer reliable performance and energy efficiency, contributing to reduced fuel expenditure in the long run.

Safety features are also a priority, with shields and guards designed to protect operators during use. The controls are ergonomically situated to minimize potential hazards. Additionally, the low center of gravity design ensures stable operation, reducing the risk of tipping especially while working on inclines.

In conclusion, the Woods Equipment TS1680Q and TS1680 models are designed with the modern user in mind. Their blend of durability, innovative technology, and operational versatility makes them a top choice for both agricultural use and landscaping projects. Whether you're a farmer looking for reliable mowing solutions or a landscaper in need of a versatile implement, these models deliver exceptional performance and value.