Shindaiwa 82053, DH212 manual Fuel Requirements, Operation

Page 11

Operation

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

Fuel

WARNING

Alternative fuels, such as E-20 (20% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

IMPORTANT

Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30 days and oil with fuel stabi-

lizer is not used, it should first be treated with a fuel stabilizer such as STA-BIL™.

Oil is a registered JASO FC classified oil and also meets or exceeds ISO-L-EGD performance requirements. Shindaiwa One is recommended for use in all Shindaiwa low emissions engines.Shindaiwa One also includes a fuel stabilizer.

ENGLISH

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DH212 Hedge Trimmer Operator’s manual Table of ContentsIntroduction Personal condition and safety equipment Safety Manual safety symbols and important informationInternational symbols Hearing Protection Physical ConditionEye Protection Hand ProtectionKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaProduct Emission Durability EPA Phase 2/ C.A.R.B. TierEquipment check Emission ControlDescription Right Front Handle GuardEnglish Assembly ContentsBlade stiffener removal Install blade stiffenerFuel Fuel RequirementsOperation Metric Handling FuelAfter use Fuel to Oil Mix-501 RatioPurge Bulb Starting cold engineStopping engine Starting warm engineSkill levels MaintenanceHedge trimming Do-It-Yourself Maintenance Procedures Maintenance intervalsLevel Air filterFuel filter Remaining sand will damage engine Spark plugCooling system English Exhaust system Spark Arrestor ScreenCylinder Exhaust Port High Altitude Operation Carburetor adjustmentEngine Break-In Lubrication Gear Box AssemblyBlades Sharpening blades Blade adjustment Troubleshooting Storage Long Term Storage over 30 daysModel DH212 SpecificationsHOW will a Covered Part be CORRECTED? Manufacturers Warranty CoverageOwners Warranty Responsibilities What does this Warranty COVER?English English English Shindaiwa Inc Shindaiwa Corporation 11975 S.W. Herman Rd Cortadora DE Setos DH212 Importante IntroducciónEl manual del operador Tabla de materiasForma de los Símbolos Símbolos internacionalesProtección de los oídos Condición físicaProtección de los ojos Protección de las manosAgarre bien la unidad Lesiones debidas a esfuerzos repetitivosLea los manuales Despeje el área de trabajoDurabilidad DE LAS Emisiones DEL Producto Fase 2 de EPA / Nivel III de C.A.R.BEquipos Control de emisionesCerca del silenciador DescripciónSP8 Nota ContenidoMontajeo Nota Instale el refuerzo de la hojaDesmontaje del refuerzo de hoja Combustible Requisitos del combustibleOperación Instrucciones de mezcla Manipulación del combustibleCebador Arranque del motor en fríoParada del motor Arranque con el motor caliente¡IMPORTANTE Recorte de setosMantenimiento Niveles de habilidadProcedimientos De Mantenimiento De Do-It-Yourself Intervalos de mantenimientoNivel Filtro de aireFiltro de combustible Sistema de enfriamiento BujíaSP19 Sistema de escape Rejilla del apagachispasOrificio de escape del cilindro Importante Rodaje del motorAjuste de altitud elevada Ajuste del carburadorLubricación HojasConjunto de la caja de engranajes Afilado de las hojas Ajuste de la hoja Localización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasModelo HC-150 EspecificacionesPiezas Cubiertas POR LA Garantía Contra Defectos Relacionados CON LAS Emisiones EPA PhaseCalifornia Tier III Emissions Defect Warranty EN Relacionados CON Emisiones EPA Phase 2 / CaliforniaNotas SP30 SP31 Shindaiwa Inc Shindaiwa Corporation TAILLE-HAIE DH212 Table des matières Le manuel d’utilisationCondition physique et équipement de sécurité Sécurité Symboles de sécurité et informations importantesSymboles internationaux Protection auditive Condition physiqueProtection des yeux Protection des mainsGarder une bonne prise Microtraumatismes répétésLisez les manuels Dégagez la zone de travailDurabilité DU Contrôle DES Émissions EPA Phase 2 / C.A.R.B. TierÉquipement Contrôle des émissionsBrûlures près du silencieux Garde de poignée avant droite Autocollant de danger deFR8 Remarque ContenuAssemblage Retrait du raidisseur de lame Installation du raidisseur de lameCarburant Spécifications pour le carburantUtilisation Remisage Manipulation du carburantInstructions de mélange Après utilisationRemarque Démarrage d’un moteur froidArrêt du moteur Démarrage d’un moteur chaudEntretien TailleIntervalles d’entretien Niveaux de difficultéNiveau Filtre à airFiltre à carburant Système de refroidissement BougieRetirer l’écran de chaleur C du couvercle du silencieux Systéme déchappement Pare-étincellesLumière d’échappement du cylindre Reglage du carburateur Rodage du moteurRéglage pour haute altitude Lubrification LamesAssemblage du carter d’engrenages Affûtage des lames Ajustement de lame Dépannage Remisage Remisage à long terme plus de 30 joursModèle DH212 CaractéristiquesEN CAS DE Pièce Défectueuse Couverture DE LA Garantie DES FabricantsResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie CE QUE Couvre Cette GarantieRemarques FR30 FR31

82053, DH212 specifications

The Shindaiwa 82053, DH212 is a powerful and versatile tool designed for professionals in the landscaping and horticultural industries. Known for its robust performance and reliability, this product stands out among its peers due to several innovative features and technologies tailored to meet the needs of demanding users.

One of the main highlights of the Shindaiwa 82053 is its powerful engine. This tool is equipped with a high-performance engine that delivers exceptional cutting power while maintaining fuel efficiency. The engine's design minimizes vibration and ensures smooth operation, allowing users to work effectively without excessive fatigue.

The DH212, a key component of the Shindaiwa 82053, is recognized for its ergonomic design. This feature enhances user comfort during extended periods of operation. The handles are thoughtfully designed to provide superior grip and control, reducing the strain on the operator's hands and arms. This is particularly important for professionals who often work long hours.

Another significant characteristic of the Shindaiwa 82053 is its advanced cutting technology. The dual-edge blade system provides a cleaner and faster cut, allowing for efficient trimming of hedges and bushes. The blades are crafted from high-quality materials that ensure durability and longevity, even under heavy use.

The tool's rapid-start feature is designed to reduce startup time, enabling users to get to work quickly without unnecessary delays. Additionally, the advanced air filtration system helps to keep the engine clean, extending its lifespan and improving reliability.

The Shindaiwa 82053, DH212 is also known for its easy maintenance. The design incorporates accessible components, allowing users to perform routine checks and repairs with minimal hassle. This user-friendly approach reduces downtime and enhances productivity.

In terms of safety, the Shindaiwa 82053 features multiple safeguards that protect the user during operation. The protective guards and blade covers ensure that operators can work confidently without the fear of accidental injuries.

Overall, the Shindaiwa 82053, DH212 embodies a perfect blend of power, comfort, and advanced technology, making it an ideal choice for professional landscapers and gardeners. Its exceptional performance and reliability are sure to make it a trusted tool in any landscaping arsenal. Whether trimming hedges or maintaining gardens, the Shindaiwa 82053 is a dependable ally that ensures work is completed efficiently and effectively.
Top Page Image Contents