Shindaiwa 82053 manual Specifications, Model DH212

Page 27

Specifications

MODEL-------------------------------------------

DH212

Length----------------------------------------------

1,040 mm (41.0 in.)

Width-----------------------------------------------

240 mm (9.45 in.)

Height----------------------------------------------

200 mm (7.87 in.)

Weight, dry----------------------------------------

4.98 kg (11.0 lb.)

Type of Engine------------------------------------

Air cooled, two-stroke, single cylinder, gasoline engine

Displacement--------------------------------------

21.2 cc (1.29 cu.in.)

Bore------------------------------------------------

32.2 mm (1.27 in.)

Stroke----------------------------------------------

26.0 mm (1.02 in.)

Exhaust System-----------------------------------

Spark Arrestor Muffler w/catalyst

Carburetor-----------------------------------------

Zama w/purge

Ignition System-----------------------------------

Flywheel Magneto, Capacitor discharge ignition

Spark Plug-----------------------------------------

BPMR-8Y (Gap 0.65 mm (0.026 in.)

Fuel-------------------------------------------------

Mixed Fuel - gasoline and oil

Fuel/Oil Ratio-------------------------------------

50 : 1 two-stroke, air-cooled engine oil.

Gasoline--------------------------------------------

Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more

 

than 10% ethyl alcohol or 15% MTBE. Do not use alternative fuels such as

 

E-20 or E-85.

Oil--------------------------------------------------

Shindaiwa One Premium Universal 2-Stroke Oil

Fuel Tank Capacity-------------------------------

0.5 lit. (16.9 fl. oz)

Starter System-------------------------------------

Automatic Recoil Starter

Clutch----------------------------------------------

Centrifugal Type

Gear Case Ratio-----------------------------------

5.88:1

Cutter-----------------------------------------------

Double Reciprocating Blade, Double Edge

Length-------------------------------------------

490 mm (19.3 in.)

Pitch----------------------------------------------

35 mm (1.38 in.)

Height--------------------------------------------

21 mm (0.83 in.)

Maximum Diameter Cut

 

Soft Material-------------------------------------

25.4 mm (1 in.)

Woody Material---------------------------------

13 mm (1/2 in.)

Idle Speed (RPM)--------------------------------

2,750 - 3,250

Clutch Engagement Speed (RPM)-------------

3,700 - 4,300

Wide Open Throttle (RPM)---------------------

9,500 - 11,500

IMPORTANT This spark ignition system complies with Canadian ICES-002.

ENGLISH

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DH212 Hedge Trimmer Table of Contents IntroductionOperator’s manual Safety Manual safety symbols and important information International symbolsPersonal condition and safety equipment Hearing Protection Physical ConditionEye Protection Hand ProtectionKeep a Firm Grip Repetitive Stress InjuriesRead the Manuals Clear the Work AreaProduct Emission Durability EPA Phase 2/ C.A.R.B. TierEquipment check Emission ControlDescription Right Front Handle GuardEnglish Assembly ContentsBlade stiffener removal Install blade stiffenerFuel Requirements OperationFuel Metric Handling FuelAfter use Fuel to Oil Mix-501 RatioPurge Bulb Starting cold engineStopping engine Starting warm engineMaintenance Hedge trimmingSkill levels Do-It-Yourself Maintenance Procedures Maintenance intervalsAir filter Fuel filterLevel Spark plug Cooling systemRemaining sand will damage engine English Spark Arrestor Screen Cylinder Exhaust PortExhaust system Carburetor adjustment Engine Break-InHigh Altitude Operation Gear Box Assembly BladesLubrication Sharpening blades Blade adjustment Troubleshooting Storage Long Term Storage over 30 daysModel DH212 SpecificationsHOW will a Covered Part be CORRECTED? Manufacturers Warranty CoverageOwners Warranty Responsibilities What does this Warranty COVER?English English English Shindaiwa Inc Shindaiwa Corporation 11975 S.W. Herman Rd Cortadora DE Setos DH212 Importante IntroducciónEl manual del operador Tabla de materiasForma de los Símbolos Símbolos internacionalesProtección de los oídos Condición físicaProtección de los ojos Protección de las manosAgarre bien la unidad Lesiones debidas a esfuerzos repetitivosLea los manuales Despeje el área de trabajoDurabilidad DE LAS Emisiones DEL Producto Fase 2 de EPA / Nivel III de C.A.R.BEquipos Control de emisionesCerca del silenciador DescripciónSP8 Contenido MontajeoNota Instale el refuerzo de la hoja Desmontaje del refuerzo de hojaNota Requisitos del combustible OperaciónCombustible Instrucciones de mezcla Manipulación del combustibleCebador Arranque del motor en fríoParada del motor Arranque con el motor caliente¡IMPORTANTE Recorte de setosMantenimiento Niveles de habilidadProcedimientos De Mantenimiento De Do-It-Yourself Intervalos de mantenimientoFiltro de aire Filtro de combustibleNivel Sistema de enfriamiento BujíaSP19 Rejilla del apagachispas Orificio de escape del cilindroSistema de escape Importante Rodaje del motorAjuste de altitud elevada Ajuste del carburadorHojas Conjunto de la caja de engranajesLubricación Afilado de las hojas Ajuste de la hoja Localización y reparación de fallas Almacenamiento Almacenamiento a largo plazo más de 30 díasModelo HC-150 EspecificacionesPiezas Cubiertas POR LA Garantía Contra Defectos Relacionados CON LAS Emisiones EPA PhaseCalifornia Tier III Emissions Defect Warranty EN Relacionados CON Emisiones EPA Phase 2 / CaliforniaNotas SP30 SP31 Shindaiwa Inc Shindaiwa Corporation TAILLE-HAIE DH212 Table des matières Le manuel d’utilisationSécurité Symboles de sécurité et informations importantes Symboles internationauxCondition physique et équipement de sécurité Protection auditive Condition physiqueProtection des yeux Protection des mainsGarder une bonne prise Microtraumatismes répétésLisez les manuels Dégagez la zone de travailDurabilité DU Contrôle DES Émissions EPA Phase 2 / C.A.R.B. TierÉquipement Contrôle des émissionsBrûlures près du silencieux Garde de poignée avant droite Autocollant de danger deFR8 Contenu AssemblageRemarque Retrait du raidisseur de lame Installation du raidisseur de lameSpécifications pour le carburant UtilisationCarburant Remisage Manipulation du carburantInstructions de mélange Après utilisationRemarque Démarrage d’un moteur froidArrêt du moteur Démarrage d’un moteur chaudEntretien TailleIntervalles d’entretien Niveaux de difficultéFiltre à air Filtre à carburantNiveau Système de refroidissement BougieRetirer l’écran de chaleur C du couvercle du silencieux Pare-étincelles Lumière d’échappement du cylindreSystéme déchappement Rodage du moteur Réglage pour haute altitudeReglage du carburateur Lames Assemblage du carter d’engrenagesLubrification Affûtage des lames Ajustement de lame Dépannage Remisage Remisage à long terme plus de 30 joursModèle DH212 CaractéristiquesEN CAS DE Pièce Défectueuse Couverture DE LA Garantie DES FabricantsResponsabilités DU Propriétaire À L’ÉGARD DE LA Garantie CE QUE Couvre Cette GarantieRemarques FR30 FR31

82053, DH212 specifications

The Shindaiwa 82053, DH212 is a powerful and versatile tool designed for professionals in the landscaping and horticultural industries. Known for its robust performance and reliability, this product stands out among its peers due to several innovative features and technologies tailored to meet the needs of demanding users.

One of the main highlights of the Shindaiwa 82053 is its powerful engine. This tool is equipped with a high-performance engine that delivers exceptional cutting power while maintaining fuel efficiency. The engine's design minimizes vibration and ensures smooth operation, allowing users to work effectively without excessive fatigue.

The DH212, a key component of the Shindaiwa 82053, is recognized for its ergonomic design. This feature enhances user comfort during extended periods of operation. The handles are thoughtfully designed to provide superior grip and control, reducing the strain on the operator's hands and arms. This is particularly important for professionals who often work long hours.

Another significant characteristic of the Shindaiwa 82053 is its advanced cutting technology. The dual-edge blade system provides a cleaner and faster cut, allowing for efficient trimming of hedges and bushes. The blades are crafted from high-quality materials that ensure durability and longevity, even under heavy use.

The tool's rapid-start feature is designed to reduce startup time, enabling users to get to work quickly without unnecessary delays. Additionally, the advanced air filtration system helps to keep the engine clean, extending its lifespan and improving reliability.

The Shindaiwa 82053, DH212 is also known for its easy maintenance. The design incorporates accessible components, allowing users to perform routine checks and repairs with minimal hassle. This user-friendly approach reduces downtime and enhances productivity.

In terms of safety, the Shindaiwa 82053 features multiple safeguards that protect the user during operation. The protective guards and blade covers ensure that operators can work confidently without the fear of accidental injuries.

Overall, the Shindaiwa 82053, DH212 embodies a perfect blend of power, comfort, and advanced technology, making it an ideal choice for professional landscapers and gardeners. Its exceptional performance and reliability are sure to make it a trusted tool in any landscaping arsenal. Whether trimming hedges or maintaining gardens, the Shindaiwa 82053 is a dependable ally that ensures work is completed efficiently and effectively.
Top Page Image Contents