Shindaiwa 62888-94013, P231 manual Introduction, Contents

Page 2

Introduction

Attention Statements

The Shindaiwa P231 Pole Pruner is designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability. Shindaiwa’s high- performance engines represent the leading edge of 2-cycle engine technology, delivering exceptionally high power with remarkably low displacement and weight. As an owner/ operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in these instructions describes units available at the time of publication.

Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to units previously manufactured.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Throughout this manual are special “attention statements”.

DANGER!

A statement preceded by the triangular attention symbol and the word “DANGER” contains informa- tion that should be acted upon to prevent serious injury or death.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains informa- tion that should be acted upon to prevent serious bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses spe- cial significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Warning labels affixed to the machine are as follows:

Read and follow this manual, make sure anyone using the pruner does likewise. Failure to do so could result in serious personal injury or machine failure. Keep this manual for future reference.

Always wear a hard hat to reduce the risk of head injuries during operation of this machine. In addition, always wear eye and hearing protection. Shindaiwa recommends wearing a face shield as additional face and eye protection.

Wear nonslip heavy-duty work gloves to improve your grip on the pole pruner handle. Wear sturdy footwear with nonslip soles to provide good footing. Steel-toe safety boots are recommended. Wear snug-fitting clothes that also permit freedom of movement.

Never operate this tool or any other power equipment if you are tired, ill, or under the influence of alcohol, drugs, or any substance that could affect your ability or judgement.

Keep bystanders at least 15 meters away from the operating pruner to reduce the risk of being struck by falling objects or thrown debris.

Never operate the pruner at an angle greater than 60º in order to reduce the risk of being struck by falling objects during operation.

Contents

PAGE

Safety Precautions

3

Product Description

6

Technical Specifications

7

Assembly

7

Installing and Adjusting

 

the Bar and Chain

9

Chain Oiler

10

Mixing Fuel

11

Starting the Engine

12

Stopping the Engine

13

Using the Pole Pruner

14

Maintenance

15

Long Term Storage

16

Troubleshooting Guide

18

Warranty

21

IMPORTANT!

The procedures described in this manual are intended to help you get the most from your unit as well as to protect you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your power tool, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa, Inc. at the address printed on the back of this Manual.

Beware of pinching. Pinching the saw along the tip of the guide bar may force the bar back rapidly toward the operator. Pinching can occur whenever wood closes in around the moving chain.

Beware of kickback! Kickback can occur whenever the tip of the guide bar touches an object while the saw is operating. Kickback may force the bar up and back toward the operator!

Image 2
Contents P231 Pole Pruner Español SP1 Français FR1Contents IntroductionBeware of Kickback Safety PrecautionsKickback and Pinching Beware of pinchingProperly Equipped Operator Operating PrecautionsOperating Precautions Safety Equipment and Labels Kg/13.4 lb Slide switchAdjustable oiler 2804 mm/110.4Powerhead Installation AssemblyPrior to assembly Connecting the Throttle CableConnect The Throttle Cable Adjusting the Throttle CableKeep the open ends of the tubes clean and free of debris Assembling tube sectionsDisassembling the tube sections Installing and Adjusting the Bar and ChainInstalling the Chain Adjust the pump as follows Adjusting the ChainAdjusting Oil Flow Rate Chain OilerMinimize the risk of fire, burns, and personal injury Mixing FuelFilling the Fuel Tank Always transport and store fuels in an approved containerStarting the Engine Slide the ignition switch to the on positionWhen the Engine Starts Never start the engine from the operating positionStopping the Engine Adjusting the Engine IdleCheck and Adjust Idle Speed Using the Pole Pruner Hour Maintenance General MaintenanceDaily Maintenance MufflerEvery 10 to 15 hours of operation 10/15-Hour MaintenanceClean or replace fuel filter Every 135 hours of operation, remove and clean the muffler MaintenanceMuffler maintenance Long Term StorageSharpening the Chain For consistent filing angles, use a filing guideTroubleshooting Guide Engine difficult to shut off Poor accelerationEngine stops abruptly Chain rotates at idle speedThis Warranty is Administered by Fax Specifications subject to change without notice P231 Podadora de Extensión Introducción Declaraciones de seguridad Índice¡ADVERTENCIA! Contragolpe y apriete Instrucciones generales de seguridadTrabaje con cuidado Guardarte de contragolpePrecauciones del funcionamiento El operario debidamente equipadoInstrucciones de seguridad Realice siempre el mantenimiento Instrucciones de seguridad continuaciónEtiquetas de seguridad Descripción del producto EspecificacionesBarras y cadenas opcionales EnsamblarAntes de Ensamblar Conexión del cable del aceleradorAjuste el cable del acelerador Ensamblar continuaciónConecte el cable del acelerador Ensamblar de las secciones del tuboInstalación la cadena Instalación y ajuste de la barra y la cadena de la sierraDesmontaje de las secciones del tubo PiñónLlenado del depósito de aceite Adjuste la cadenaBomba de aceite Ajuste del flujo del aceiteEjemplos de cantidades de mezcla a proporción de Mezcla de combustibleLlenando el tanque de combustible 100 200 400Cuando arranca el motor… Arranque del motorNunca arranque el motor desde la posición de operación El accesorio de cortes pudo Parada del motorAjuste de marcha mínima del motor Continuar girando cuando se para El motorEl uso de la potadora de extensión Cada 10 horas mantenimiento Mantenimiento generalMantenimiento diario Cada 50 horas mantenimiento Mantenimiento continuaciónCada 10 15 horas mantenimiento Cada 135 horas de operación, retire y limpie el silenciador Almacenamiento de largo plazoMantenimiento del silenciador Guía para la lima Rendimiento de la cadenaPara limar en ángulos iguales, use una Posible causa Guía de localización de fallasQué revisar RemedioGuía de localización de fallas continuación Qué revisar Posible causa RemedioEsta Garantía ES Administrada POR Notas Tronçonneuse à perche P231 Les échappements du moteur Introduction Mises en gardeUnénoncéprécédédelamention De ce produit contiennent des subConsignes de sécurité Réaliser les coupes à haut régimeNe pas utiliser l’appareil sans le silencieux Équipement complet de l’utilisateurConsignes d’utilisation Consignes d’utilisation suite Étiquettes et dispositifs de sécuritéCaractéristiques techniques Options du guide-chaîne et de la chaîne Avant l’assemblageMontage de la tête motorisée Raccord du câble d’accélérationRéglage du câble d’accélération Assemblage suiteRaccorder le câble d’accélération Assemblage les éléments du tubeDésassemblage des éléments Installation et réglage du guide-chaîne et de la chaîneInstallation de la chaîne Remplissage du réservoir d’huile Réglage de la chaîneHuileur de chaîne Réglage du débit d’huileMélange de carburant Remplissage du réservoir de carburantDémarrage du moteur Lorsque le moteur démarreVérification et réglage du ré- gime de ralenti Arrêt du moteurRéglage du ralenti du moteur Utilisation de la tronçonneuse Entretien aux 10 heures EntretienEntretien quotidien SilencieuxEntretien aux 10 à 15 heures Entretien suiteRemisage à long terme Entretien aux 50 heuresEntretien du pare-étincelles Affûtage de la chaîne Technique d’affûtage correcteGuide de dépannage SolutionPoints à contrôler Cause probable Solution Points à contrôlerGuide de dépannage suite Cause probableÉtendue DE LA Garantie DU Fabricant FR22 FR23 FR24

P231, 62888-94013 specifications

Shindaiwa has long been recognized for its commitment to quality in outdoor power equipment, and the model 62888-94013, specifically the P231, is no exception. This efficient and robust handheld blower is designed for both professionals and homeowners who demand reliable performance for leaf and debris management.

One of the standout features of the Shindaiwa P231 is its impressive air velocity. With a maximum air speed of 175 mph, this blower can tackle even the most stubborn leaves and debris with ease. This powerful airflow is complemented by a lightweight design, making it easy to maneuver even during extended use. Weighing just around 9.8 lbs, the P231 minimizes operator fatigue, allowing for longer periods of operation without discomfort.

Powering the P231 is a reliable 23.9 cc two-stroke engine, engineered for efficient fuel consumption and reduced emissions. This engine technology not only adheres to environmental standards but also provides a perfect balance of power and efficiency. The use of Shindaiwa’s proprietary engine design ensures that the blower can perform consistently regardless of the conditions, whether it’s wet leaves in the fall or light debris in the spring.

Another noteworthy feature of the P231 is its durable construction. Built with high-quality materials, the blower is designed to withstand the rigors of frequent use. The ergonomic handle is designed for comfort, ensuring a secure grip that reduces vibration and enhances control during operation. Furthermore, the blower includes a user-friendly start system that makes kick-starting the engine a hassle-free experience.

Shindaiwa also prioritizes ease of maintenance in the P231 model. It is equipped with a simple air filter access and a fuel tank designed for easy refueling. This attention to user-friendliness ensures that you can keep your equipment in top condition with minimal effort.

In summary, the Shindaiwa 62888-94013 P231 is a dynamic handheld blower that combines power, efficiency, and durability. Ideal for both professional landscapers and homeowners, its features like high air velocity, quality engine technology, lightweight design, and ease of maintenance make it an excellent choice for effective outdoor cleanup. Whether it’s for a large property or routine yard work, the P231 delivers reliability and outstanding performance every time.