Shindaiwa P231, 62888-94013 manual Safety Equipment and Labels

Page 5

Operating Precautions (continued)

■ Always maintain the P231 pole

CAUTION!

■ Always clear your work area of trash

■ Do not make unauthorized

pruner according to the this owner’s

modifications or substitutions to the

or hidden debris to help ensure

manual and follow the recommended

guide bar or chain.

good footing.

scheduled maintenance.

■ Never allow the engine to run at high

■ Keep the saw chain sharp and

■ Never modify or disable any of the

RPM without a load. Doing so could

properly adjusted.

pole pruner’s safety devices.

damage the engine.

■ Keep the pruner as clean as

■ Always use genuine Shindaiwa parts

■ When transporting the pruner in

possible. Keep it free of loose

and accessories when repairing or

a vehicle, tie it down securely to

vegetation, mud, etc.

maintaining this unit.

prevent damage and fuel spillage.

 

 

 

 

Safety Equipment and Labels

IMPORTANT!

Safety and Operation Information Labels: Make sure all information labels are undam- aged and readable. Immediately replace damaged or missing information labels. New labels are available from your local autho- rized Shindaiwa dealer.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Español SP1 Français FR1 P231 Pole PrunerIntroduction ContentsKickback and Pinching Safety PrecautionsBeware of Kickback Beware of pinchingProperly Equipped Operator Operating PrecautionsOperating Precautions Safety Equipment and Labels Adjustable oiler Slide switchKg/13.4 lb 2804 mm/110.4Prior to assembly AssemblyPowerhead Installation Connecting the Throttle CableKeep the open ends of the tubes clean and free of debris Adjusting the Throttle CableConnect The Throttle Cable Assembling tube sectionsDisassembling the tube sections Installing and Adjusting the Bar and ChainInstalling the Chain Adjusting Oil Flow Rate Adjusting the ChainAdjust the pump as follows Chain OilerFilling the Fuel Tank Mixing FuelMinimize the risk of fire, burns, and personal injury Always transport and store fuels in an approved containerWhen the Engine Starts Slide the ignition switch to the on positionStarting the Engine Never start the engine from the operating positionStopping the Engine Adjusting the Engine IdleCheck and Adjust Idle Speed Using the Pole Pruner Daily Maintenance General MaintenanceHour Maintenance MufflerEvery 10 to 15 hours of operation 10/15-Hour MaintenanceClean or replace fuel filter Muffler maintenance MaintenanceEvery 135 hours of operation, remove and clean the muffler Long Term StorageFor consistent filing angles, use a filing guide Sharpening the ChainTroubleshooting Guide Engine stops abruptly Poor accelerationEngine difficult to shut off Chain rotates at idle speedThis Warranty is Administered by Fax Specifications subject to change without notice P231 Podadora de Extensión Índice Introducción Declaraciones de seguridadTrabaje con cuidado Instrucciones generales de seguridad¡ADVERTENCIA! Contragolpe y apriete Guardarte de contragolpePrecauciones del funcionamiento El operario debidamente equipadoInstrucciones de seguridad Realice siempre el mantenimiento Instrucciones de seguridad continuaciónEtiquetas de seguridad Especificaciones Descripción del productoAntes de Ensamblar EnsamblarBarras y cadenas opcionales Conexión del cable del aceleradorConecte el cable del acelerador Ensamblar continuaciónAjuste el cable del acelerador Ensamblar de las secciones del tuboDesmontaje de las secciones del tubo Instalación y ajuste de la barra y la cadena de la sierraInstalación la cadena PiñónBomba de aceite Adjuste la cadenaLlenado del depósito de aceite Ajuste del flujo del aceiteLlenando el tanque de combustible Mezcla de combustibleEjemplos de cantidades de mezcla a proporción de 100 200 400Cuando arranca el motor… Arranque del motorNunca arranque el motor desde la posición de operación Ajuste de marcha mínima del motor Parada del motorEl accesorio de cortes pudo Continuar girando cuando se para El motorEl uso de la potadora de extensión Cada 10 horas mantenimiento Mantenimiento generalMantenimiento diario Cada 50 horas mantenimiento Mantenimiento continuaciónCada 10 15 horas mantenimiento Cada 135 horas de operación, retire y limpie el silenciador Almacenamiento de largo plazoMantenimiento del silenciador Guía para la lima Rendimiento de la cadenaPara limar en ángulos iguales, use una Qué revisar Guía de localización de fallasPosible causa RemedioQué revisar Posible causa Remedio Guía de localización de fallas continuaciónEsta Garantía ES Administrada POR Notas Tronçonneuse à perche P231 Unénoncéprécédédelamention Introduction Mises en gardeLes échappements du moteur De ce produit contiennent des subRéaliser les coupes à haut régime Consignes de sécuritéNe pas utiliser l’appareil sans le silencieux Équipement complet de l’utilisateurConsignes d’utilisation Étiquettes et dispositifs de sécurité Consignes d’utilisation suiteCaractéristiques techniques Montage de la tête motorisée Avant l’assemblageOptions du guide-chaîne et de la chaîne Raccord du câble d’accélérationRaccorder le câble d’accélération Assemblage suiteRéglage du câble d’accélération Assemblage les éléments du tubeDésassemblage des éléments Installation et réglage du guide-chaîne et de la chaîneInstallation de la chaîne Huileur de chaîne Réglage de la chaîneRemplissage du réservoir d’huile Réglage du débit d’huileRemplissage du réservoir de carburant Mélange de carburantLorsque le moteur démarre Démarrage du moteurVérification et réglage du ré- gime de ralenti Arrêt du moteurRéglage du ralenti du moteur Utilisation de la tronçonneuse Entretien quotidien EntretienEntretien aux 10 heures SilencieuxRemisage à long terme Entretien suiteEntretien aux 10 à 15 heures Entretien aux 50 heuresEntretien du pare-étincelles Technique d’affûtage correcte Affûtage de la chaînePoints à contrôler Cause probable Solution SolutionGuide de dépannage Points à contrôlerCause probable Guide de dépannage suiteÉtendue DE LA Garantie DU Fabricant FR22 FR23 FR24

P231, 62888-94013 specifications

Shindaiwa has long been recognized for its commitment to quality in outdoor power equipment, and the model 62888-94013, specifically the P231, is no exception. This efficient and robust handheld blower is designed for both professionals and homeowners who demand reliable performance for leaf and debris management.

One of the standout features of the Shindaiwa P231 is its impressive air velocity. With a maximum air speed of 175 mph, this blower can tackle even the most stubborn leaves and debris with ease. This powerful airflow is complemented by a lightweight design, making it easy to maneuver even during extended use. Weighing just around 9.8 lbs, the P231 minimizes operator fatigue, allowing for longer periods of operation without discomfort.

Powering the P231 is a reliable 23.9 cc two-stroke engine, engineered for efficient fuel consumption and reduced emissions. This engine technology not only adheres to environmental standards but also provides a perfect balance of power and efficiency. The use of Shindaiwa’s proprietary engine design ensures that the blower can perform consistently regardless of the conditions, whether it’s wet leaves in the fall or light debris in the spring.

Another noteworthy feature of the P231 is its durable construction. Built with high-quality materials, the blower is designed to withstand the rigors of frequent use. The ergonomic handle is designed for comfort, ensuring a secure grip that reduces vibration and enhances control during operation. Furthermore, the blower includes a user-friendly start system that makes kick-starting the engine a hassle-free experience.

Shindaiwa also prioritizes ease of maintenance in the P231 model. It is equipped with a simple air filter access and a fuel tank designed for easy refueling. This attention to user-friendliness ensures that you can keep your equipment in top condition with minimal effort.

In summary, the Shindaiwa 62888-94013 P231 is a dynamic handheld blower that combines power, efficiency, and durability. Ideal for both professional landscapers and homeowners, its features like high air velocity, quality engine technology, lightweight design, and ease of maintenance make it an excellent choice for effective outdoor cleanup. Whether it’s for a large property or routine yard work, the P231 delivers reliability and outstanding performance every time.
Top Page Image Contents