DCA-15SPXU4 —TRAILER MAINTENANCE
Tires/Wheels/Lug Nuts
Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched.
CAUTION - EYESIGHT HAZARD
ALWAYS wear safety glasses when removing or installing force fitted parts. Failure to comply may result in serious injury.
CAUTION - REPAIRINGTRAILER WHEELS
DO NOT attempt to repair or modify a wheel. DO NOT install in inner tube to correct a leak through the rim. If the rim is cracked, the air pressure in the inner
tube may cause pieces of the rim to explode (break off) with great force and cause serious eye or bodily injury.
TireWear/Inflation
Tire inflation pressure is the most important factor in tire life. Pressure should be checked cold before operation DO NOT bleed air from tires when they are hot!. Check inflation pressure weekly during use to insure the maximum tire life and tread wear.
Table 13 (Tire Wear Troubleshooting) will help pinpoint the causes and solutions of tire wear problems.
Suspension
The leaf suspension springs and associated components (Figure 38) should be visually inspected every 6,000 miles for signs of excessive wear, elongation of bolt holes, and loosening of fasteners. Replace all damaged parts (suspension) immediately. Torqued suspension components as detailed in Table 14.
Figure 38. Major Suspension Components
Table 14. Suspension Torque Requirements
Item | Torque | |
|
| |
3/8" | ||
|
| |
7/16" | ||
|
| |
1/2" | ||
|
| |
SHACKLE BOLT | SNUG FIT ONLY. PARTS MUST ROTATE FREELY. | |
LOCKING NUTS OR COTTER PINS ARE PROVIDED | ||
SPRING EYE BOLT | ||
TO RETAIN | ||
| ||
|
| |
SHOULDER TYPE | ||
SHACKLE BOLT | ||
| ||
|
|
PAGE 38 —