DCA-220SSJ — DIAGNOSTIC DISPLAY
First Time Start Up
1.When power is first applied to the diagnostic display, the “Logo” is displayed.
2.The first seven items of the “Main Menu” will be displayed.Touching the “Arrow Buttons”will scroll through the menu selection.
GO TO
LANGUAGES
STORED CODES
ENGINE CONFG
SETUP
SELECT UNITS
2. The “Wait to Start” message will be displayed for | 3. Touching the right arrow button will scroll down to reveal | |
engines with a | the last items of “Main Menu” screen highlighting the | |
next item down. | ||
Start” message is no longer displayed the operator may | ||
| ||
start the engine. Note: Displays only when SAE J1939 |
|
message is supported by engine manufacturer.
ADJUST BACKLIGHT
ADJUST CONTRAST
UTILITIES
WAIT TO
START
PREHEAT
3. Once the engine has started the single engine parameter is displayed.
4. Touch the Arrows” to scroll to the desired menu item or touch “Menu” to exit the Main menu and return to the engine parameter display.
0 | 1500 | 3000 |
1800 RPM
ENG RPM COOL TEMP
Main Menu Navigation
| 0 | 1500 | 3000 | 98% | |||
|
| 1800 RPM | LOAD RPM | ||||
|
|
|
| ||||
|
| 14.2 | |||||
|
|
| COOL TEMP | ||||
ENG RPM | |||||||
BATT VOLT | |||||||
|
|
|
|
|
|
| |
Selecting a Language
1000 RPM
ENG RPM
57 PSI
OIL PRES
1.Starting at the single or four engine parameter display, touch “Menu”.
1.Starting at the main menu display use the “Arrows to scroll to the “Language” menu and once highlighted touch the “Enter” button.
0 | 1500 | 3000 | 98% | |||
| 1800 RPM | LOAD RPM | ||||
|
|
| ||||
| 14.2 | |||||
|
| COOL TEMP | ||||
ENG RPM | ||||||
BATT VOLT | ||||||
1000 RPM
ENG RPM
57 PSI
OIL PRES
GO TO
LANGUAGES STORED CODES ENGINE CONFG SETUP