DCA-36SPX — OUTPUT TERMINAL PANEL FAMILIARIZATION
Connecting Loads
Loads can be connected to the generator by the Ouput Terminal Lugs or the convenience receptacles (Figure 13). Make sure to read the operation manual before attempting to connect a load to the generator.
To protect the output terminals from overload, a
RECEPTACLES
LOAD
Over Current Relay
An over current relay (Figure 14) is connected to the main circuit breaker. In the event of an overload, both the circuit breaker and the over current relay may trip. If the circuit breaker can not be reset, the reset button on the over cur- rent relay must be pressed. The over current relay is lo- cated in the control box.
Figure 14. Over Current Relay
GFCI
RECEPTACLES
LOAD
AC OUTPUT
TERMINALS
U 
O 
V
GROUND
LOAD
NEUTRAL
Figure 13. Connecting Loads
PAGE 28 —