Great Dane GBKW2561S, GBKH2761S Using the Choke, Using the Motion Control Levers, Engage Choke

Page 19

OPERATING

Using the Choke

Engage Choke:

• Pull choke knob (A) out.

Disengage Choke:

• Push choke knob (A) in.

Using the Motion Control Levers

CAUTION: Avoid injury! Learn use of the motion control levers and practice at half throttle until becoming proficient and comfortable with the operation of the machine.

Do not move motion control levers from forward to reverse or reverse to forward position rapidly. Sudden direction changes could cause loss of control or damage the machine.

NOTE: Two types of control levers are available - standard “center steer” levers and optional “over the lap” levers. The operation of both styles of levers is the same except as noted.

The functions of the motion control levers are:

•Dual function neutral position.

•Steering.

•Acceleration.

•Braking.

Neutral Detent Position - Standard “Center Steer” Levers

NOTE: When the control levers are in the neutral detent position, the control lever rollers (A) located on each side of the control console will be seated in the notches in the console.

• Motion control levers must be in the neutral detent position, the PTO

switch disengaged and the park brake locked to start the engine.

Neutral Lock Position - Optional “Over the Lap” Levers

Picture Note: Motion control levers (A) shown in the neutral lock position.

•Motion control levers must be in the neutral lock position, the PTO switch disengaged and the park brake locked to start the engine.

•Forward and reverse movement of the motion control levers is prevented when levers are moved to the neutral lock position.

•Operator can exit mower with the engine running when the PTO switch is disengaged, the motion control levers are in the neutral lock position and the park brake is locked.

•Motion control levers must be in the neutral lock position to safely enter and exit the operator seat.

Neutral Position - Optional “Over the Lap” Levers

Picture Note: Motion control levers (A) shown in the neutral position.

•Machine speed, motion, and direction can be controlled when the engine is running, operator is on the seat and the park brake is unlocked.

Operating - 17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents OPERATOR’S Manual Page Introduction IntroductionProduct Identification Safety Labels Safety LabelsUnderstanding The Machine Safety Labels Safety Labels Avoid Crushing Safety SafetyChecking Mowing Area Parking Safely Using a Spark ArrestorRotating Blades are Dangerous Use Seat Belt Properly Keep Rops Installed ProperlyProtect Children Avoid TippingDriving Safely on Public Roads Maintenance and StorageKeep Riders Off Avoid High Pressure FluidsPrevent Fires Tire SafetyHandling Fuel Safely Handling Waste Product and Chemicals Daily Operating ChecklistOperating OperatingRaising and Lowering Operator Seat Operator Station ControlsMiscellaneous Controls Mounting and Dismounting Machine SafelyUsing Seat Belt Adjusting SeatRaising and Lowering Rops Adjusting Mower Deck Anti-Scalp Wheels Adjusting Mower Deck Cutting HeightTesting Neutral Start Switch Testing Safety SystemsTesting PTO Switch Testing Park Brake SwitchProcedure Testing Seat SwitchTesting the Park Brake Using the Park BrakeUsing the Hourmeter Using the Key SwitchUsing the PTO Using the Throttle LeverDisengage Choke Using the ChokeUsing the Motion Control Levers Engage ChokeGentle Right Turn ForwardReverse Gentle Left TurnSharp Left Turn Starting the EngineSharp Right Turn Mowing Tips Engaging MowerStopping the Engine Transporting MachineService Intervals Service IntervalsSpray Lubricant Service LubricationService Lubrication GreaseAvoid Fumes Service EngineService Engine Engine Warranty Maintenance StatementChanging Engine Oil and Filter Checking Engine Oil LevelOil Capacity With Filter Dry Replacing Fuel Filter Cleaning Engine Air Intake Screen and FanChecking and Cleaning Air Filter Elements Adjusting CarburetorChecking Hydraulic Oil Level Service TransmissionService Transmission Hydraulic OilRemoving and Installing Traction Drive Belt Cleaning Hydraulic Pump Cooling FinsChecking and Adjusting Motion Control Linkages Maximum Speed Drift Adjustment Neutral Creep AdjustmentCheck Maximum Speed Drift Service Transmission Hydraulic System Hose Routing Service Steering & Brakes Service Steering & BrakesHydraulic System Schematic Servicing Front Caster Wheel Roller Bearings Chariot Removing and Installing Front Caster WheelsAdjusting Front Caster Spindle Bearing InstallingServicing Caster Spindle Bearings Height Adjustment ProcedureCheck Alignment Removing and Installing Mower Deck Foot Plate Service MowerService Mower Adjusting Park BrakeLeveling Mower Deck Removing and Installing Mower Deck Belt ShieldsPicture Note Discharge chute raised for photo clarity Adjusting Level Side-to-SideChecking Level Front-to-Rear Adjusting Deck Lift Assist Spring Tension Checking and Adjusting Cutting HeightChecking and Adjusting Mower Deck Drive Belt Tension Checking and Replacing Mower Blades Removing and Installing Mower Deck Drive BeltReplacing Mower Blades Sharpening BladesBalancing Blades Replacing Mower Spindle BearingsRemoving and Installing the Battery Service ElectricalService Electrical Service the Battery SafelyBurnishing the PTO Clutch Cleaning Battery and TerminalsUsing Booster Battery Replacing FuseWiring Schematic Service Miscellaneous Service MiscellaneousCleaning and Repairing Metal Surfaces TroubleshootingTroubleshooting Cleaning and Repairing Plastic SurfacesElectrical System EngineCheck Mower Deck MachinePark Brake SteeringStorage AssemblyStorage Check Fluid Levels AssemblyInstall Motion Control Levers Install SeatInstall Rops Specifications SpecificationsGetting Quality Service Getting Quality ServiceEngine and Related Components Kawasaki Ref. No Description Qty Remarks Engine and Related Components Kohler 27 HP Hose OIL Drain Fuel Delivery System Components Over the LAP Control Assembly Electrical and Related Components Fuse Console and Control Assembly Console Hydrostatic Drive System Components Ref.No Description Qty Remarks Traction Drive and Brakes Pivot Hydraulic Schematic Seat Components Frame Assembly Frame Front Caster Assembly Yoke Caster TCA16051 RopsPage Spindle Assembly Ref. No Description Qty Remarks Deck Lift Assembly Bearing CAP 52 Cutting Deck Mower Deck Cutting Deck GDA10077 Labels Cutting Deck Labels Labels

GBKW2561S, GBKH2752S, GBKW2552S, GBKH2761S specifications

The Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S are a series of powerful and versatile washing machines designed to meet the needs of modern households. These models stand out for their innovative features, advanced technologies, and user-friendly characteristics, making laundry more efficient and effective.

One of the main features of the Great Dane washing machines is their large capacity, which allows users to wash a significant amount of laundry in one go. This is particularly beneficial for families or individuals with substantial laundry needs, as it reduces the number of loads required and saves valuable time. Additionally, the machines come equipped with a variety of wash programs tailored to different fabric types and soiling levels, ensuring optimal results for every load.

In terms of technologies, these models incorporate intelligent sensors that automatically adjust wash cycles based on the load size and fabric type. This not only enhances cleaning performance but also improves energy efficiency, as the machines consume only the necessary amount of water and electricity. The Great Dane GBKH2761S and GBKW2561S models feature inverter motors that provide quieter operation and greater reliability, translating to longer-lasting performance.

Another standout characteristic of the Great Dane washing machines is their user-friendly interface. The intuitive control panel allows users to select programs and settings easily, while the digital display provides real-time information on the wash cycle. Furthermore, many models are equipped with a delay start feature, offering flexibility for scheduling laundry around busy lifestyles.

In terms of design, the Great Dane series incorporates sleek aesthetics with durable construction, ensuring they not only perform well but also complement modern home interiors. The energy-efficient ratings of these machines make them environmentally friendly choices, helping users reduce their carbon footprint while maintaining high cleaning standards.

Overall, the Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S represent a blend of cutting-edge technology, capacity, efficiency, and user convenience, making them an ideal choice for consumers seeking reliable and effective washing solutions.
Top Page Image Contents