Great Dane GBKW2561S, GBKH2761S, GBKW2552S manual Prevent Fires, Tire Safety, Handling Fuel Safely

SAFETY

•Shut off fuel while storing or transporting. Do not store fuel near flames or drain indoors.

•Park machine on level ground. Never allow untrained personnel to service machine. Understand service procedure before doing work.

•Use jack stands or lock service latches to support components when required. Securely support any machine elements that must be raised for service work.

•Before servicing machine or attachment, carefully release pressure from any components with stored energy, such as hydraulic components or springs.

•Release hydraulic pressure by lowering attachment or cutting units to the ground or to a mechanical stop and move hydraulic control levers back and forth.

•Disconnect battery or remove spark plug (for gas engines) before making any repairs. Disconnect the negative terminal first and the positive last. Reconnect positive first and negative last.

•Use care when checking blades. Wrap the blades or wear gloves, and use caution when servicing them. Only replace blades. Never straighten or weld them.

•Keep hands, feet, clothing, jewelry and long hair away from moving parts. If possible, do not make adjustments with the engine running.

•Charge batteries in an open well ventilated area, away from spark and flames. Unplug charger before connecting or disconnecting from battery. Wear protective clothing and use insulated tools.

•Keep all parts in good working condition and all hardware tightened. Replace all worn or damaged decals.

•Check grasscatcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary. Grasscatcher components are subject to wear, damage, and deterioration which could expose moving parts or allow objects to be thrown.

•Keep all nuts and bolts tight, especially blade attachment bolts, to be sure the equipment is in safe working condition.

•Check brake operation frequently. Adjust and service as required.

•On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

Prevent Fires

•Remove grass and debris from engine compartment and muffler area, before and after operating machine, especially after mowing or mulching in dry conditions.

•Empty the grasscatcher completely before storing.

•Always shut off fuel when storing or transporting machine, if the machine has a fuel shutoff.

•Do not store machine near an open flame or source of ignition, such as a water heater or furnace.

•Check fuel lines, tank, cap, and fittings frequently for cracks or leaks. Replace if necessary.

Tire Safety

Explosive separation of a tire and rim parts can cause serious injury or death:

•Do not attempt to mount a tire without the proper equipment and experience to perform the job.

•Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel.

•When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over the tire assembly.

•Check tires for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.

Handling Fuel Safely

To avoid personal injury or property damage, use extreme care in handling fuel. Fuel is extremely flammable and fuel vapors are explosive:

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only an approved fuel container. Use only non-metal, portable fuel containers approved by the Underwriter’s Laboratory (U.L.) or the American Society for Testing & Materials (ASTM). If using a funnel, make sure it is plastic and has no screen or filter.

Safety - 9