Great Dane GBKH2752S, GBKH2761S Assembly, Check Fluid Levels, Check Tire Pressure, Install Seat

Page 50

ASSEMBLY

•Cut plastic tie straps fastening the front wheels to the shipping crate.

•Cut plastic tie straps holding the discharge chute up.

•Cut plastic tie straps securing the motion control levers to the machine.

Check Fluid Levels

NOTE: Refer to the Service sections of the operator’s manual for information regarding check locations and proper fluid levels.

•Check engine oil level.

•Check hydraulic oil level.

Check Tire Pressure

CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly:

•Do not attempt to mount a tire without the proper equipment and experience to perform the job.

•Do not inflate the tires above the recommended pressure.

•Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel.

•Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side.

1.Check tires for damage.

2.Check tire pressure with an accurate gauge.

3.Add or remove air, if necessary.

Install Motion Control Levers

1.Remove hardware from control arms.

NOTE: The control lever mounting brackets have six holes. The levers can be installed in the top four holes, or for a lower lever position, install the levers in the lower four holes.

2. Raise the seat and prop it in the upright position.

NOTE: It is easiest during installation if the bottom rear bolts are loosely installed first prior to installation of the front bolts.

3.Align motion control levers (A) with control arms. Install hardware and tighten.

3.Check motion control lever alignment.

• Move both motion control levers forward.

Install Seat

Assembly - 48

Page 49 Page 51
Image 50
Page 49 Page 51
Contents OPERATOR’S Manual Page Product Identification IntroductionIntroduction Understanding The Machine Safety Labels Safety LabelsSafety Labels Safety Labels Avoid Crushing Safety SafetyRotating Blades are Dangerous Using a Spark ArrestorChecking Mowing Area Parking Safely Avoid Tipping Keep Rops Installed ProperlyProtect Children Use Seat Belt ProperlyAvoid High Pressure Fluids Maintenance and StorageKeep Riders Off Driving Safely on Public RoadsHandling Fuel Safely Tire SafetyPrevent Fires Operating Daily Operating ChecklistOperating Handling Waste Product and ChemicalsMounting and Dismounting Machine Safely Operator Station ControlsMiscellaneous Controls Raising and Lowering Operator SeatRaising and Lowering Rops Adjusting SeatUsing Seat Belt Adjusting Mower Deck Cutting Height Adjusting Mower Deck Anti-Scalp WheelsTesting Park Brake Switch Testing Safety SystemsTesting PTO Switch Testing Neutral Start SwitchUsing the Park Brake Testing Seat SwitchTesting the Park Brake ProcedureUsing the Throttle Lever Using the Key SwitchUsing the PTO Using the HourmeterEngage Choke Using the ChokeUsing the Motion Control Levers Disengage ChokeGentle Left Turn ForwardReverse Gentle Right TurnSharp Right Turn Starting the EngineSharp Left Turn Transporting Machine Engaging MowerStopping the Engine Mowing TipsService Intervals Service IntervalsGrease Service LubricationService Lubrication Spray LubricantEngine Warranty Maintenance Statement Service EngineService Engine Avoid FumesOil Capacity With Filter Dry Checking Engine Oil LevelChanging Engine Oil and Filter Adjusting Carburetor Cleaning Engine Air Intake Screen and FanChecking and Cleaning Air Filter Elements Replacing Fuel FilterHydraulic Oil Service TransmissionService Transmission Checking Hydraulic Oil LevelChecking and Adjusting Motion Control Linkages Cleaning Hydraulic Pump Cooling FinsRemoving and Installing Traction Drive Belt Check Maximum Speed Drift Neutral Creep AdjustmentMaximum Speed Drift Adjustment Service Transmission Hydraulic System Hose Routing Hydraulic System Schematic Service Steering & BrakesService Steering & Brakes Installing Removing and Installing Front Caster WheelsAdjusting Front Caster Spindle Bearing Servicing Front Caster Wheel Roller Bearings ChariotCheck Alignment Height Adjustment ProcedureServicing Caster Spindle Bearings Adjusting Park Brake Service MowerService Mower Removing and Installing Mower Deck Foot PlateRemoving and Installing Mower Deck Belt Shields Leveling Mower DeckChecking Level Front-to-Rear Adjusting Level Side-to-SidePicture Note Discharge chute raised for photo clarity Checking and Adjusting Mower Deck Drive Belt Tension Checking and Adjusting Cutting HeightAdjusting Deck Lift Assist Spring Tension Removing and Installing Mower Deck Drive Belt Checking and Replacing Mower BladesReplacing Mower Spindle Bearings Sharpening BladesBalancing Blades Replacing Mower BladesService the Battery Safely Service ElectricalService Electrical Removing and Installing the BatteryReplacing Fuse Cleaning Battery and TerminalsUsing Booster Battery Burnishing the PTO ClutchWiring Schematic Service Miscellaneous Service MiscellaneousCleaning and Repairing Plastic Surfaces TroubleshootingTroubleshooting Cleaning and Repairing Metal SurfacesCheck EngineElectrical System Steering MachinePark Brake Mower DeckStorage AssemblyStorage Install Seat AssemblyInstall Motion Control Levers Check Fluid LevelsInstall Rops Specifications SpecificationsGetting Quality Service Getting Quality ServiceEngine and Related Components Kawasaki Ref. No Description Qty Remarks Engine and Related Components Kohler 27 HP Hose OIL Drain Fuel Delivery System Components Over the LAP Control Assembly Electrical and Related Components Fuse Console and Control Assembly Console Hydrostatic Drive System Components Ref.No Description Qty Remarks Traction Drive and Brakes Pivot Hydraulic Schematic Seat Components Frame Assembly Frame Front Caster Assembly Yoke Caster Rops TCA16051Page Spindle Assembly Ref. No Description Qty Remarks Deck Lift Assembly Bearing CAP 52 Cutting Deck Mower Deck Cutting Deck GDA10077 Labels Cutting Deck Labels Labels

GBKW2561S, GBKH2752S, GBKW2552S, GBKH2761S specifications

The Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S are a series of powerful and versatile washing machines designed to meet the needs of modern households. These models stand out for their innovative features, advanced technologies, and user-friendly characteristics, making laundry more efficient and effective.

One of the main features of the Great Dane washing machines is their large capacity, which allows users to wash a significant amount of laundry in one go. This is particularly beneficial for families or individuals with substantial laundry needs, as it reduces the number of loads required and saves valuable time. Additionally, the machines come equipped with a variety of wash programs tailored to different fabric types and soiling levels, ensuring optimal results for every load.

In terms of technologies, these models incorporate intelligent sensors that automatically adjust wash cycles based on the load size and fabric type. This not only enhances cleaning performance but also improves energy efficiency, as the machines consume only the necessary amount of water and electricity. The Great Dane GBKH2761S and GBKW2561S models feature inverter motors that provide quieter operation and greater reliability, translating to longer-lasting performance.

Another standout characteristic of the Great Dane washing machines is their user-friendly interface. The intuitive control panel allows users to select programs and settings easily, while the digital display provides real-time information on the wash cycle. Furthermore, many models are equipped with a delay start feature, offering flexibility for scheduling laundry around busy lifestyles.

In terms of design, the Great Dane series incorporates sleek aesthetics with durable construction, ensuring they not only perform well but also complement modern home interiors. The energy-efficient ratings of these machines make them environmentally friendly choices, helping users reduce their carbon footprint while maintaining high cleaning standards.

Overall, the Great Dane GBKH2761S, GBKW2552S, GBKH2752S, and GBKW2561S represent a blend of cutting-edge technology, capacity, efficiency, and user convenience, making them an ideal choice for consumers seeking reliable and effective washing solutions.
Top Page Image Contents