Briggs & Stratton 7800887, BTXPV22725E manual Assembly Unpack the Mower, Raise the Handle Assembly

Figure 2: Starter rope handle

Assembly

Unpack the Mower

1.Cut all four corners of the box from top to bottom.

2.Remove all packing materials from the mower.

3.Locate and identify the items included with the mower:

•Mulching plug (installed)

•Grass bag

•Side discharge deflector

•SAE30W Oil

•Battery Charger (7800887)

•Set of Keys (7800887)

•Operator’s manual

Raise the Handle Assembly

B A

C

1.Loosen, but do not remove, the knobs (A, Figure 1) on both sides of the upper handle.

2.Unfold the upper handle so that it is aligned with

3.	the lower handle, and tighten the upper knobs.			Assemble the Grass Bag
	Remove the handle knobs, washers and carriage
		Reproduction
	bolts from the lower handle	(B).	for		Slide the frame assembly (A, Figure 3) into the
4.	Raise the lower handle, aligning it with one of the				g ass bag (B). E sure the handle (C) is on the out-
	three sets of holes in the handle bracket. (Most			2.	side of	he grass bag.
	users will prefer the middle position). Replace he				Attach	he cl ps (D) to the sides, top and bottom of
	hardware removed in Step 3, tightening securely.				the frame assembly.
Set Up the Starter Rope Handle							C
1.	Squeeze the blade control (A, Figure 2) against				B
2.	the handle.
	Pull the starter rope handle (B)Notout of the engine to
	the rope guide (C). Hook the starter rope into the
	rope guide (it might be a tight fit).
					D			A
				Figure 3: Assembling the grass bag

A

B

Figure 1: Raising the handle assembly

en

11