Controls and Features
rDIGITAL ZOOM T/W buttons
A part of image can be magnified up to four times on the screen.
Each time the T or W button is pressed, the image is enlarged or the enlarged image is reduced by a certain degree. (Refer to page 37.)
*Images which are enlarged with the digital zoom become less clear.
*Depending on the video signal source (UXGA, etc.), this button does not work.
tPC buttons
Use these buttons to select a device connected to the PC 1, PC 2 or DVI terminals. (Refer to page 33.)
* “PC 1”, “PC 2” or “DVI” will be displayed on the top right of the projected image. (This function can be disabled using the menu.)
ySCREEN W/S buttons
Changes the projection screen size to [4:3] or [16:9].
uQUICK ALIGN. (Quick Alignment) button
Use this button to automatically align “Horizontal and vertical position”, “Tracking” and “Phase” for the projected image.
During the automatic alignment, “Quick Alignment” appears on the screen, and disappears after alignment is finished. (Refer to page 36.)
* The “Quick Alignment” function only works when the signal is input from the input terminal of PC 1, PC 2 or DVI. It does not work when the signal is input from the VIDEO IN terminal (VIDEO, Y/C and COMP. input terminal).
CAUTION
•Automatic alignment with the quick alignment function should be carried out on a bright
13