Meridian Audio FDP-DILA2 warranty Projector’s buttons, Select the Input source to be Projected

Page 32
■Projector’s buttons

Basic Operations

■Projector’s buttons

2. Select the Input source to be Projected

Press the VIDEO button or the PC button to switch the input.

 

STAND BY

LAMP

TEMP

 

OPERATE

HIDE

 

PC

KEYSTONE

 

 

VIDEO

PRESET

MENU

EXIT

ENTER

PC button

VIDEO button

•Each time you press either button, the selected input changes as follows. The selected name appears on the top right of the image on the screen for five seconds. (Called line display.)

When selecting an image device connected to the AV IN (VIDEO, Y/C or COMP) terminal:

Projector

Press VIDEO.

The input mode changes as follows every time the button is pressed.

VIDEO ↔ Y/C ↔ COMP

■Remote control unit

Remote control unit

Press the “VIDEO”, “Y/C” or “COMP” button.

VIDEO: The image from the VIDEO input terminal on the side of the unit is projected.

QUICK

ALIGN.OPERATE

HIDE

W

SCREEN FREEZE COMP VIDEO

S

PC1

PC2

DVI

Y/C

 

 

 

 

T

T

KEYSTONE DIGITAL ZOOM FOCUS ZOOM

W W

PRESETMENU

EXITENTER

PC button

VIDEO button

ZOOM button

Y/C: The image from the Y/C input terminal on the side of the unit is projected.

COMP: The image from the COMP (Y, RB/B-Y, PR/R-Y) input terminal on the side of the unit is projected.

*When there is no signal from the selected input terminal (No signal), “No Input” is displayed.

When selecting a device such as a computer which is connected to the PC1, PC2 or DVI terminal:

Projector

Press PC.

RM-M160 REMOTE CONTROL UNIT

■Language display

The display languages of the menus, direct buttons (DIGITAL ZOOM, KEYSTONE, etc) and messages is set to “ENGLISH” when the projector is bought. The display language can be selected from the following 6 languages:

“2. Select the Input source to be ProjectedProjector (Japanese)”, “English (English)”, “Deutsch (German)”, “Español (Spanish)”, “Italiano (Italian)” and “Français (French)”. (Refer to page 46.) However, some words (VIDEO, NTSC, Quick Alignment, etc) are only displayed in English.

The input mode changes as follows every time the button is pressed.

PC1 ↔ PC2 ↔ DVI

Remote control unit

Press the “PC1”, “PC2” or “DVI” button.

PC1: The image from the PC1 input terminal on the side of the unit is projected.

PC2: The image from the PC2 input terminal on the side of the unit is projected.

DVI: The image from the DVI input terminal on the side of the unit is projected.

*When there is no signal from the selected input terminal (No signal), “No Input” is displayed.

Remote control unit

Projector

SCREEN

FREEZE

COMP

VIDEO

PC

S

 

 

 

 

 

 

 

PC1

PC2

DVI

Y/C

VIDEO

 

 

 

 

[Screen display]

 

 

 

VIDEO

 

Line Display

 

Q U I C K A L I G N M E N T

 

PC 1

COMP

 

 

 

 

 

PC 2

DVI

Y/C

VIDEO

*To show the line display (Y/C, VIDEO, COMP, PC1, PC2 or DVI) or not is selectable by the menu. Refer to “Setting and Adjusting Other Functions (OPTIONS)” on page 54.

Note

•When no image signal is input to the selected input terminal, the message “No Input” is displayed on the screen. (Refer to page 67.)

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents FDP-DILA2 Installation and Operations ManualHome Theater Optimized SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT SAFEGUARDSAbout the installation place About burning-inof the D-ILAdevicePower cord Contents for Macintosh Accessoriesfor checking operation Controls and Features 3AC IN power input terminal5MAIN POWER switch 1Exhaust ventsControls and Features pConnector panelwAir inlet eControl panelControls and Features t y utAir inlet filter yOpening for replacing the light-sourcelampControl Panel on the Projector Controls and Features pPRESET buttoneLAMP indicator rTEMP indicatorControls and Features 1PC computer 1 input terminal D-sub 3-row15 pin3DVI terminal DVI-D24 pin 4 PC computer 2 input terminals BNC ⋅Remote Control Unit Controls and Features rDIGITAL ZOOM T/W buttonstPC buttons ySCREEN W/S buttonsInstall the batteries Precautions for using batteriesControls and Features Open the back coverCAUTIONS Installing the ProjectorPrecautions for Installation Adjusting the Inclination of the Projector Adjusting the vertical angle of the projectorInstalling the Projector Leveling the projectorInstalling the Projector against the Screen Installing the ProjectorSide view Top viewOptional Lenses Installing the ProjectorProjection Distance and Screen Size Installing the Projector 2Loosen the SHIFT LOCK fixing boltscreen 4Tighten the SHIFT LOCK fixing bolt firmlyUsing as a wireless remote control unit Installing the ProjectorCAUTIONS When installing adjusting/setting the unitInstalling the Projector Connecting to Various Devices Video signalsComputer signals Note: Instructions for installing the VideoAllowable input signals Connecting to Various DevicesMemo Connecting to Video DevicesConnecting to Various Devices Memo Connecting to HDTV Devices/DVD PlayersConnecting to Various Devices Connecting to Devices which Control the Projector Connecting to Various DevicesConnection to an IBM PC or IBM-compatiblecomputer Connecting to Computer DevicesConnecting to Various Devices Connecting to Various Devices 1Release the stopper at each end andopen the ferrite core 2 Wind the cord around the ferrite coreConnecting the Power Cord Basic Operations Lamp control settings1. Turning on the Power 1 Turn on the MAIN POWER switchRemote control unit Turning off the PowerRemote control unit Remote control unitRemote control unit Projector’s buttons3. Adjust the Screen Size Zooming Remote control unit4. Adjust Focus 5. Setting the Screen Aspect RatioRemote control unit Projector’s buttonsTurning off Image HIDE Removing the Trapezoidal Distortion of the ImageBasic Operations Remote control unitQuick Alignment Function QUICK ALIGN Remote control unit Displaying a Still Picture FREEZEZooming a Part of the Image DIGITAL ZOOM T/W Basic OperationsQuick Reference Guide for No signal Menu Mode Menu OperationsMenu Transition Diagram in No signal Menu Mode Menu Transition Diagram in Video Menu Mode Menu OperationsFactory set value Quick Reference Guide for Video Menu ModeMenu Operations Menu Transition Diagram in PC Menu Mode Menu OperationsQuick Reference Guide for PC Menu Mode Menu Operationsor adjust the value 4Press the cursor button 5 or ∞ toselect an item in the submenu 1Press the MENU buttonRemote control unit ProjectorVideo menu mode PC menu modeChanging the Color System Video Menu Mode Only 1Press the MENU buttonChanging the Language Display 1Press the MENU button3Set the language with the cursor button 5 or ∞ 1Press the MENU buttonAdjusting Tracking/Phase Adjust the tracking or phase with the cursor 2 or1Press the MENU button Menu Operations1Press the MENU button Make adjustment with the cursor 2 or To perform All ResetHowever, some fine-tuningfor specific installations may be requiredAdjusting Color temperature To perform All Reset1Press the MENU button buttonmenu Adjusting the Video Screen/Menu Position1Press the MENU button 1Press the MENU button 1Press the MENU button Setting and Adjusting Other Functions OPTIONS Make adjustment with the cursor 2 or1Press the MENU button Menu OperationsMenu Operations Getting Information 1Press the MENU button3Press the MENU button to exit the menu mode Menu OperationsReplacing the Fuse 5Reinstall the fuse holder into the projectorthe projector and the wall outlet 2Loosen the fuse holder to remove itReplacing the Light-SourceLamp Light-sourcelamp and lamp use timeReplacing the Light-SourceLamp CAUTIONSLoosen the two screws with a flat-endscrewdriver 4Replace the lamp-replacementopening 5Reset the lamp use time3 Insert the new light-sourcelamp fully inside and fasten the screwsResetting the Lamp Use Time 1Turn on the MAIN POWER switch to goProjector’s button into stand-bymodeCleaning and Replacing the Filter Cover 1Turn off the MAIN POWER switch3Clean the filter 4Reinstall the filterTroubleshooting Maintenance TroubleshootingWarning Indication Action to be taken for warning indicationWarning Messages MessageCause Corrective actionWarning Messages Memo Displayed when the lamp controlWarning Messages Specifications Optical mechanism systemElectrical system Input terminalsSpecifications GeneralSpecifications FrontSide 22.430Specifications Y/C terminalRS-232Cterminal PC1 terminal/PC OUT terminal2. Command Format RS-232Cexternal control1. Communication Specifications 3. Control command table 2-3Parameters used for the data formatRS-232Cexternal control 1 Numeric valueFor lens unit GL-M2915SG1.5 AppendixFor lens unit GL-M2910G1 For lens unit GL-M2930SZG2.9 to AppendixFor lens unit GL-M2920ZG2 to Page Page Page WARRANTY LIMITED WARRANTYFaroudja Laboratories A Division of Genesis Microchip Corp
Top Page Image Contents