Meridian Audio FDP-DILA2 4Press the cursor button 5 or ∞ to, select an item in the submenu

Page 42
4Press the cursor button 5 or ∞ to

Menu Operations

Basic Menu Operation

When the MENU button is pressed, the projector enters Video or PC menu mode by responding to the input signal being received.

Video menu mode:

Enters this mode when video-device-related signals are input from the following devices.

Video devices connected to the VIDEO IN (Y/C, VIDEO and COMP) terminals.

PC menu mode:

4Press the cursor button 5 or to

select an item in the submenu.

When a “Language” has been selected in step 2, press to set the language.

Remote control unit

Projector

Enters this mode when computer-related signals are input from the following devices.

A computer connected to the PC 1 terminal.

A computer connected to the PC 2 terminal, which outputs analog RGB, V, H/Cs signals.

A computer connected to the DVI terminal.

1Press the MENU button.

The main menu is displayed on the screen.

Remote control unit

Projector

MENU

MENU

2Press the cursor button 5 or to select an item in the main menu.

Remote control unit

Projector

3Press the cursor button 3 or the

ENTER button to enter the submenu.

The submenu corresponding to the item selected in step 2 is displayed on the screen.

*When you selected “Information” in step 2, no submenu is available.

Remote control unit

Projector

5Press the cursor button 2 or 3 to set

or adjust the value.

Remote control unit

Projector

When an item which has the “ENTER” message has been selected in step 4, press the ENTER button to move to the next submenu.

All reset (Refer to page 49)

Position (Refer to page 51)

Decoder (Refer to page 45)

Keystone (Refer to page 54)

Page 1 (Refer to page 54)

Page 2 (Refer to page 54)

To exit the main menu:

While the main menu is displayed, press the MENU button. The main menu disappears and the original picture image resumes.

To exit the submenu:

While the submenu is displayed, press the EXIT button. The menu returns to the previous menu.

To exit the menu mode directly, press the MENU button. The submenu disappears and the original video image is restored.

42

Image 42
Contents Installation and Operations Manual Home Theater OptimizedFDP-DILA2 About the installation place SAFETY PRECAUTIONSIMPORTANT INFORMATION IMPORTANT SAFEGUARDS About burning-inof the D-ILAdevicePower cord Contents Accessories for checking operationfor Macintosh 5MAIN POWER switch Controls and Features3AC IN power input terminal 1Exhaust ventswAir inlet Controls and FeaturespConnector panel eControl paneltAir inlet filter Controls and Featurest y u yOpening for replacing the light-sourcelampControl Panel on the Projector eLAMP indicator Controls and FeaturespPRESET button rTEMP indicator3DVI terminal DVI-D24 pin Controls and Features1PC computer 1 input terminal D-sub 3-row15 pin 4 PC computer 2 input terminals BNC ⋅Remote Control Unit tPC buttons Controls and FeaturesrDIGITAL ZOOM T/W buttons ySCREEN W/S buttonsControls and Features Install the batteriesPrecautions for using batteries Open the back coverInstalling the Projector Precautions for InstallationCAUTIONS Installing the Projector Adjusting the Inclination of the ProjectorAdjusting the vertical angle of the projector Leveling the projectorSide view Installing the Projector against the ScreenInstalling the Projector Top viewInstalling the Projector Projection Distance and Screen SizeOptional Lenses screen Installing the Projector2Loosen the SHIFT LOCK fixing bolt 4Tighten the SHIFT LOCK fixing bolt firmlyUsing as a wireless remote control unit Installing the ProjectorWhen installing adjusting/setting the unit Installing the ProjectorCAUTIONS Computer signals Connecting to Various DevicesVideo signals Note: Instructions for installing the VideoAllowable input signals Connecting to Various DevicesConnecting to Video Devices Connecting to Various DevicesMemo Connecting to HDTV Devices/DVD Players Connecting to Various DevicesMemo Connecting to Devices which Control the Projector Connecting to Various DevicesConnecting to Computer Devices Connecting to Various DevicesConnection to an IBM PC or IBM-compatiblecomputer open the ferrite core Connecting to Various Devices1Release the stopper at each end and 2 Wind the cord around the ferrite coreConnecting the Power Cord Basic Operations Lamp control settingsRemote control unit 1. Turning on the Power1 Turn on the MAIN POWER switch Turning off the PowerRemote control unit Remote control unitRemote control unit Projector’s buttons4. Adjust Focus 3. Adjust the Screen Size ZoomingRemote control unit 5. Setting the Screen Aspect RatioTurning off Image HIDE Remote control unitProjector’s buttons Removing the Trapezoidal Distortion of the ImageRemote control unit Quick Alignment Function QUICK ALIGNBasic Operations Zooming a Part of the Image DIGITAL ZOOM T/W Remote control unitDisplaying a Still Picture FREEZE Basic OperationsMenu Operations Menu Transition Diagram in No signal Menu ModeQuick Reference Guide for No signal Menu Mode Menu Transition Diagram in Video Menu Mode Menu OperationsQuick Reference Guide for Video Menu Mode Menu OperationsFactory set value Menu Transition Diagram in PC Menu Mode Menu OperationsQuick Reference Guide for PC Menu Mode Menu Operationsselect an item in the submenu or adjust the value4Press the cursor button 5 or ∞ to 1Press the MENU buttonVideo menu mode Remote control unitProjector PC menu modeChanging the Color System Video Menu Mode Only 1Press the MENU button3Set the language with the cursor button 5 or ∞ Changing the Language Display1Press the MENU button 1Press the MENU button1Press the MENU button Adjusting Tracking/PhaseAdjust the tracking or phase with the cursor 2 or Menu Operations1Press the MENU button However, some fine-tuningfor specific Make adjustment with the cursor 2 orTo perform All Reset installations may be required1Press the MENU button Adjusting Color temperatureTo perform All Reset buttonAdjusting the Video Screen/Menu Position 1Press the MENU buttonmenu 1Press the MENU button 1Press the MENU button 1Press the MENU button Setting and Adjusting Other Functions OPTIONSMake adjustment with the cursor 2 or Menu OperationsMenu Operations 3Press the MENU button to exit the menu mode Getting Information1Press the MENU button Menu Operationsthe projector and the wall outlet Replacing the Fuse5Reinstall the fuse holder into the projector 2Loosen the fuse holder to remove itReplacing the Light-SourceLamp Light-sourcelamp and lamp use timeReplacing the Light-SourceLamp CAUTIONSLoosen the two screws with a flat-endscrewdriver 3 Insert the new light-sourcelamp fully 4Replace the lamp-replacementopening5Reset the lamp use time inside and fasten the screwsProjector’s button Resetting the Lamp Use Time1Turn on the MAIN POWER switch to go into stand-bymode3Clean the filter Cleaning and Replacing the Filter Cover1Turn off the MAIN POWER switch 4Reinstall the filterTroubleshooting Maintenance TroubleshootingWarning Indication Action to be taken for warning indicationCause Warning MessagesMessage Corrective actionWarning Messages Displayed when the lamp control Warning MessagesMemo Electrical system SpecificationsOptical mechanism system Input terminalsSpecifications GeneralSide SpecificationsFront 22.430RS-232Cterminal SpecificationsY/C terminal PC1 terminal/PC OUT terminalRS-232Cexternal control 1. Communication Specifications2. Command Format RS-232Cexternal control 3. Control command table2-3Parameters used for the data format 1 Numeric valueAppendix For lens unit GL-M2910G1For lens unit GL-M2915SG1.5 Appendix For lens unit GL-M2920ZG2 toFor lens unit GL-M2930SZG2.9 to Page Page Page Faroudja Laboratories WARRANTYLIMITED WARRANTY A Division of Genesis Microchip Corp