Meridian Audio FDP-DILA2 Open the back cover, Install the batteries, 3Close the back cover

Controls and Features

Installing Batteries

Install batteries in the remote control. If the remote control has started to work erratically, replace the batteries.

1

2

Open the back cover.

Open the back cover in the direction of the arrow.

Install the batteries.

Place the two supplied batteries (AA/R6-size) in the remote control as illustrated below.

Precautions for using batteries

If batteries are used incorrectly, they may crack or leak liquid. This could cause a fire, burn, malfunction, or staining or damaging of the surroundings.

Beware of the following:

•Do not mix new and old batteries.

•Do not mix different types of batteries as they differ in characteristics.

•Place batteries so they match the polarities indicated:

(+) to (+) and (–) to (–).

•Be sure to put the minus (–) end in first to avoid short-circulating.

•Use only designated batteries.

•Remove the batteries if the remote is not to be used for a prolonged period.

•When the batteries are exhausted, replace them immediately. Otherwise, liquid could leak, or malfunction could occur due to leaking liquid. If the leaked liquid contacts the skin, wipe it off with a cloth, otherwise the skin could become rough.

•Do not put batteries into a fire or try to recharge them.

•Batteries run for six months to one year in normal use. However, the batteries supplied are for confirming operation and may not run that long. When the remote control starts failing to work properly, replace the batteries with new ones.

3Close the back cover.

First fit the claws on the back cover in the case, then close the back cover in the direction of the arrow.

14