Meridian Audio FDP-DILA2 warranty Warning Messages

Warning Messages

Message	Cause	Corrective action	Page
	• When the DIGITAL ZOOM button	• Digital-zoom function does not	13, 37
	is pressed for the video signals	work for the inputted video
	that cannot be zoomed (UXGA	signals.
	60Hz, SXGA 60Hz.), this	To use the this function, input the
	message appears for a few	video signals that can be digitally
D.ZOOM	seconds to notify that the image	zoomed.
	cannot be digitally zoomed.
	* To forcibly clear the message,
	press the EXIT button.
	Displayed when the lamp control	• Arrange for a new lamp (lamp	44, 46
	setting is set to NORMAL MODE	unit) or replace the lamp early.
	• Appears every time the projector
	is turned on after the lamp use
	time has exceeded 900 hours and
Lamp replacement	until it reaches 1000 hours.
	* The message is cleared by
EXIT
	pressing any button.
	Displayed when the lamp control	• Replace with a new lamp (lamp	44, 46
	setting is set to NORMAL MODE	unit) and reset the lamp time.
	• When the lamp use time reaches
	1000 hours, the word “Warning”
Warning	blinks on the screen.
Lamp replacement	* To cancel this message, press
EXIT	the EXIT button.
	However, the same message will
	appear every hour.
	* If the power is turned off after the
	lamp use time has exceeded
	1000 hours, the power can not be
	turned on again.
	* When the lamp use time reaches
	1010 hours, the projector is
	forcibly turned off and can not be
	turned back on again.

67