Meridian Audio FDP-DILA2 warranty General, Specifications

Page 70
Specifications

Specifications

General

Power requirements

120 V AC, 50/60 Hz

Power consumption

7 A

Allowable operation

41°F to 95°F (+ 5°C to + 35°C)

 

temperature

 

Allowable relative

20% to 80% (no condensation)

 

humidity

 

Allowable storage

14°F to 140°F (– 10°C to + 60°C)

 

temperature

 

Dimensions

Approx. 20" 10-1/2" 15-1/2" (Approx. 505 mm 265 mm 393 mm)

 

 

[Carrying band, Excluding protrusions]

 

 

(Width Height Depth)

Weight

Approx. 32.12 lbs. (Approx. 14.6 kg)

Accessories

(Refer to page 5.)

*Design and specifications are subject to change without notice.

*D-ILA devices are manufactured with a very high-precision technology, allowing 99.99% of the pixels to be effective. Only 0.01% or less of the pixels are missing or always on.

*For easy understanding, pictures and illustrations maybe emphasized, composed or have omissions and may be more or less different from actual products.

*TRADEMARKS

D-ILA is a trademark of Victor Company of Japan, Limited.

IBM and IBM PC are registered trademarks of International Business Machines Corporation. Macintosh is a registered trademarks of Apple Computer, Inc.

VESA is a trademark of the non-profit organization Video Electronics Standards Association.

All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

70

Image 70
Contents Home Theater Optimized Installation and Operations ManualFDP-DILA2 About the installation place SAFETY PRECAUTIONSIMPORTANT INFORMATION IMPORTANT SAFEGUARDS About burning-inof the D-ILAdevicePower cord Contents for checking operation Accessoriesfor Macintosh 5MAIN POWER switch Controls and Features3AC IN power input terminal 1Exhaust ventswAir inlet Controls and FeaturespConnector panel eControl paneltAir inlet filter Controls and Featurest y u yOpening for replacing the light-sourcelampControl Panel on the Projector eLAMP indicator Controls and FeaturespPRESET button rTEMP indicator3DVI terminal DVI-D24 pin Controls and Features1PC computer 1 input terminal D-sub 3-row15 pin 4 PC computer 2 input terminals BNC ⋅Remote Control Unit tPC buttons Controls and FeaturesrDIGITAL ZOOM T/W buttons ySCREEN W/S buttonsControls and Features Install the batteriesPrecautions for using batteries Open the back coverPrecautions for Installation Installing the ProjectorCAUTIONS Installing the Projector Adjusting the Inclination of the ProjectorAdjusting the vertical angle of the projector Leveling the projectorSide view Installing the Projector against the ScreenInstalling the Projector Top viewProjection Distance and Screen Size Installing the ProjectorOptional Lenses screen Installing the Projector2Loosen the SHIFT LOCK fixing bolt 4Tighten the SHIFT LOCK fixing bolt firmlyUsing as a wireless remote control unit Installing the ProjectorInstalling the Projector When installing adjusting/setting the unitCAUTIONS Computer signals Connecting to Various DevicesVideo signals Note: Instructions for installing the VideoAllowable input signals Connecting to Various DevicesConnecting to Various Devices Connecting to Video DevicesMemo Connecting to Various Devices Connecting to HDTV Devices/DVD PlayersMemo Connecting to Devices which Control the Projector Connecting to Various DevicesConnecting to Various Devices Connecting to Computer DevicesConnection to an IBM PC or IBM-compatiblecomputer open the ferrite core Connecting to Various Devices1Release the stopper at each end and 2 Wind the cord around the ferrite coreConnecting the Power Cord Basic Operations Lamp control settingsRemote control unit 1. Turning on the Power1 Turn on the MAIN POWER switch Turning off the PowerRemote control unit Remote control unitRemote control unit Projector’s buttons4. Adjust Focus 3. Adjust the Screen Size ZoomingRemote control unit 5. Setting the Screen Aspect RatioTurning off Image HIDE Remote control unitProjector’s buttons Removing the Trapezoidal Distortion of the ImageQuick Alignment Function QUICK ALIGN Remote control unitBasic Operations Zooming a Part of the Image DIGITAL ZOOM T/W Remote control unitDisplaying a Still Picture FREEZE Basic OperationsMenu Transition Diagram in No signal Menu Mode Menu OperationsQuick Reference Guide for No signal Menu Mode Menu Transition Diagram in Video Menu Mode Menu OperationsMenu Operations Quick Reference Guide for Video Menu ModeFactory set value Menu Transition Diagram in PC Menu Mode Menu OperationsQuick Reference Guide for PC Menu Mode Menu Operationsselect an item in the submenu or adjust the value4Press the cursor button 5 or ∞ to 1Press the MENU buttonVideo menu mode Remote control unitProjector PC menu modeChanging the Color System Video Menu Mode Only 1Press the MENU button3Set the language with the cursor button 5 or ∞ Changing the Language Display1Press the MENU button 1Press the MENU button1Press the MENU button Adjusting Tracking/PhaseAdjust the tracking or phase with the cursor 2 or Menu Operations1Press the MENU button However, some fine-tuningfor specific Make adjustment with the cursor 2 orTo perform All Reset installations may be required1Press the MENU button Adjusting Color temperatureTo perform All Reset button1Press the MENU button Adjusting the Video Screen/Menu Positionmenu 1Press the MENU button 1Press the MENU button 1Press the MENU button Setting and Adjusting Other Functions OPTIONSMake adjustment with the cursor 2 or Menu OperationsMenu Operations 3Press the MENU button to exit the menu mode Getting Information1Press the MENU button Menu Operationsthe projector and the wall outlet Replacing the Fuse5Reinstall the fuse holder into the projector 2Loosen the fuse holder to remove itReplacing the Light-SourceLamp Light-sourcelamp and lamp use timeReplacing the Light-SourceLamp CAUTIONSLoosen the two screws with a flat-endscrewdriver 3 Insert the new light-sourcelamp fully 4Replace the lamp-replacementopening5Reset the lamp use time inside and fasten the screwsProjector’s button Resetting the Lamp Use Time1Turn on the MAIN POWER switch to go into stand-bymode3Clean the filter Cleaning and Replacing the Filter Cover1Turn off the MAIN POWER switch 4Reinstall the filterTroubleshooting Maintenance TroubleshootingWarning Indication Action to be taken for warning indicationCause Warning MessagesMessage Corrective actionWarning Messages Warning Messages Displayed when the lamp controlMemo Electrical system SpecificationsOptical mechanism system Input terminalsSpecifications GeneralSide SpecificationsFront 22.430RS-232Cterminal SpecificationsY/C terminal PC1 terminal/PC OUT terminal1. Communication Specifications RS-232Cexternal control2. Command Format RS-232Cexternal control 3. Control command table2-3Parameters used for the data format 1 Numeric valueFor lens unit GL-M2910G1 AppendixFor lens unit GL-M2915SG1.5 For lens unit GL-M2920ZG2 to AppendixFor lens unit GL-M2930SZG2.9 to Page Page Page Faroudja Laboratories WARRANTYLIMITED WARRANTY A Division of Genesis Microchip Corp