Husqvarna WG4815E, WG3613E manual Maintenance Schedule

MAINTENANCE

Maintenance

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by an authorized service workshop is recommended in order to maintain your machine in the best possible condition and to ensure safe operation.

Read Safety Instructions section “Maintenance” on page 10.

z = Described in this manual  = Not described in this manual

		Daily		Weekly	At	Maintenance interval
		mainte-		mainte-	least		in hours
		nance		nance	once
					each
Maintenance	Page	Before	After			25	50	100	300
					year
Check for fuel and oil leakages	-	
Check the parking brake	41	z					z
Check the engine’s oil level (every refueling)	47	z
Front and rear tires	40	z
Check the fuel pump’s air filter	40					z
Check the safety system	37	z
Check/clean the engine’s cooling air intake	38		z			z
Check the cutting deck	42					z
Check underside of rear deck	42		z
Check hardware (screws, nuts, etc.)	43		z
Start the engine and blades, listen for unusual	-		
sounds
Clean under the mower deck	43		z
Inspect/Replace blades 2)	44	z
Check the condition of belts, belt pulleys, etc.	41				z			z
Check for damage	-		
Check the tire pressures	40					z
Thoroughly clean around the engine	-		
Clean around belts, belt pulleys, etc.	-		

English-34