Husqvarna WG4815E, WG3613E manual Maintenance

Page 13

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the protective plate for the mower deck’s drive belt is removed.

Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance.

Never fill the fuel tank indoors.

Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling fuel, as carelessness can result in personal injury or fire.

Only store fuel in containers approved for the purpose.

Never remove the fuel tank cap and never fill the fuel tank while the engine is running.

Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames.

If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

Store the machine and fuel in such a way that there is no risk of leaking fuel or fuel vapor leading to damages.

Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

Avoid overfilling. If you spill fuel on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you have spilled fuel on your clothing, change your clothing.

Allow the machine to cool before taking any actions in the engine compartment.

Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened and that the equipment is in good condition.

8011-637

Never fill the fuel tank indoors

WARNING!

The engine, the exhaust system components become very warm during operation.

Risk for burns if touched.

8011-777

Do not smoke when using machine.

English-11

Image 13
Contents WG4815E/968999120 WG3613E/968999117 Page WG3613E WG4815E OPERATOR’S Manual MowerEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Keep a safe Safety Instructions Safety InstructionsGeneral Use Age of the user Do as follows Driving on SlopesDo not Children Maintenance Use protective glasses at maintenance work Customer responsibilities TransportControls ControlsControl Locations Recoil Starter Grip Ignition SwitchOperator Presence Levers Motion control leversNeutral Bail Gear shift leverParking Brake Throttle Control and Choke Control USE Full Throttle When Mowing , forBlade Engagement Lever Choke ControlRefueling Fuel Shut-off Valve AccessoriesClose fuel valve at the end of each mowing job Operation OperationBefore Starting Starting the Engine Fuel shut-off valve, Open Presence lever Running GearboxTo operate on hills ReversingMowing Tips Mowing patterns Emergency stop StoppingNormal operating stop Stopping the Engine It may be necessary to readjust drive and brake linkages Adjustment of cutting heightCutting height table Axle Spacers Blade Position Spacers Height Caster arm Under cutter HousingAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance MaintenanceMaintenance Schedule 300 Ignition System Functional check Checking the Safety SystemChecking the Engines Cooling Air Intake Checking and Adjusting Throttle and Choke CableReplacing the Air Filter Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Checking the V-belts Checking the Parking BrakeDeck belt Checking the Blades Brake Rod AdjustmentUnder side of rear deck Caster Wheels Cleaning and WashingHardware Blade replacement Lubrication LubricationLubrication Schedule Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesFront Wheel Mount Front Wheel BearingsEngine oil Changing the Engine Oil Changing the Oil FilterChecking the Oil Level Coupling Drive wheel idle arm, right and leftMower deck lever Rear wheel Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-52 Storage ServiceStorage Winter StorageWiring diagrams Wiring DiagramsTechnical data Technical DataWG3613E WG4815E Overall dimensions Torque SpecificationsUSA requirements Conformity CertificatesService Journal Service JournalDelivery Service After the First 8 HoursHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05