Husqvarna WG4815E, WG3613E manual Drive wheel idle arm, right and left, Coupling, Mower deck lever

Page 51

LUBRICATION

6. Drive wheel idle arm, right and left

Lubricate with a grease gun, one zerk for each arm, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

7. Coupling

Lubricate with a grease gun, one zerk for each coupling, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

8. Mower deck lever

Lubricate with a grease gun, one zerk for each lever, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

8011-495

Lubricating drive wheel idle arm

8011-494

Lubricating coupling

8011-715

Lubricating deck lever

English-49

Image 51
Contents WG4815E/968999120 WG3613E/968999117 Page WG3613E WG4815E OPERATOR’S Manual MowerEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Keep a safe Safety Instructions Safety InstructionsGeneral Use Age of the user Driving on Slopes Do as followsDo not Children Maintenance Use protective glasses at maintenance work Customer responsibilities TransportControls ControlsControl Locations Recoil Starter Grip Ignition SwitchOperator Presence Levers Motion control leversGear shift lever Neutral BailParking Brake Choke Control USE Full Throttle When Mowing , forThrottle Control and Choke Control Blade Engagement LeverRefueling Accessories Fuel Shut-off ValveClose fuel valve at the end of each mowing job Operation OperationBefore Starting Starting the Engine Fuel shut-off valve, Open Presence lever Running GearboxReversing To operate on hillsMowing Tips Mowing patterns Stopping Emergency stopNormal operating stop Stopping the Engine It may be necessary to readjust drive and brake linkages Adjustment of cutting heightCutting height table Axle Spacers Blade Position Spacers Height Caster arm Under cutter HousingAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance MaintenanceMaintenance Schedule 300 Ignition System Functional check Checking the Safety SystemChecking the Engines Cooling Air Intake Checking and Adjusting Throttle and Choke CableReplacing the Air Filter Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Checking the Parking Brake Checking the V-beltsDeck belt Brake Rod Adjustment Checking the BladesUnder side of rear deck Cleaning and Washing Caster WheelsHardware Blade replacement Lubrication LubricationLubrication Schedule Front Wheel Bearings Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel MountEngine oil Changing the Engine Oil Changing the Oil FilterChecking the Oil Level Drive wheel idle arm, right and left CouplingMower deck lever Rear wheel Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-52 Winter Storage ServiceStorage StorageWiring diagrams Wiring DiagramsTechnical Data Technical dataWG3613E WG4815E Overall dimensions Torque SpecificationsUSA requirements Conformity CertificatesAfter the First 8 Hours Service JournalService Journal Delivery ServiceHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05