Husqvarna WG4815E, WG3613E manual English-52

Page 54

TROUBLE SHOOTING GUIDE

The engine overheats.

Clogged air intake or cooling fins.

 

 

 

Engine overloaded.

 

 

 

• Poor ventilation around engine.

 

 

 

• Defective engine speed regulator.

 

 

 

• Too little or no oil in the engine.

 

 

 

Defective spark plugs.

 

 

 

 

 

 

 

The machine moves slowly, unevenly,

Drive belt for the gear slack or

 

 

 

 

has come off.

 

 

 

 

 

 

 

Mower deck not engaging.

Drive belt for the mower deck has come loose.

 

 

 

• The control for engaging the mower deck is

 

 

 

 

faulty.

 

 

 

 

 

 

 

Uneven mowing results.

Different air pressure in the tires on the left and

 

 

 

 

right sides.

 

 

 

Bent blades.

 

 

 

• Spacers for height adjustment faulty placed.

 

 

 

• The blades are blunt.

 

 

 

• Driving speed too high.

 

 

 

• The grass is too long.

 

 

 

• Grass collected under the mower deck.

 

 

 

 

 

 

 

The machine vibrates.

The blades are loose.

 

 

 

• The blades are incorrectly balanced.

 

 

 

• The engine is loose.

 

 

 

 

 

 

 

The machine moves when in neutral postion.

The motion control linkage out of adjustment.

 

 

 

 

 

 

 

The machine pulls left or right.

The tire pressure uneven.

 

 

 

• The motion control linkage incorrectly adjusted.

 

 

 

Soft terrian.

 

 

 

Sloope to steep.

 

 

 

• The tracking not adjusted.

 

 

 

• The brakes faulty adjusted.

 

 

English-52

Image 54
Contents WG4815E/968999120 WG3613E/968999117 Page OPERATOR’S Manual Mower WG3613E WG4815EEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Keep a safe Safety Instructions Safety InstructionsGeneral Use Age of the user Driving on Slopes Do as followsDo not Children Maintenance Use protective glasses at maintenance work Transport Customer responsibilitiesControls ControlsControl Locations Ignition Switch Recoil Starter GripMotion control levers Operator Presence LeversGear shift lever Neutral BailParking Brake Blade Engagement Lever USE Full Throttle When Mowing , forThrottle Control and Choke Control Choke ControlRefueling Accessories Fuel Shut-off ValveClose fuel valve at the end of each mowing job Operation OperationBefore Starting Starting the Engine Fuel shut-off valve, Open Presence lever Gearbox RunningReversing To operate on hillsMowing Tips Mowing patterns Stopping Emergency stopNormal operating stop Stopping the Engine Adjustment of cutting height It may be necessary to readjust drive and brake linkagesSpacers Height Caster arm Under cutter Housing Cutting height table Axle Spacers Blade PositionAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance MaintenanceMaintenance Schedule 300 Ignition System Checking the Safety System Functional checkChecking and Adjusting Throttle and Choke Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Checking the Parking Brake Checking the V-beltsDeck belt Brake Rod Adjustment Checking the BladesUnder side of rear deck Cleaning and Washing Caster WheelsHardware Blade replacement Lubrication LubricationLubrication Schedule Front Wheel Mount Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel BearingsChanging the Oil Filter Engine oil Changing the Engine OilChecking the Oil Level Drive wheel idle arm, right and left CouplingMower deck lever Rear wheel Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-52 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data Technical dataWG3613E WG4815E Torque Specifications Overall dimensionsConformity Certificates USA requirementsDelivery Service Service JournalService Journal After the First 8 HoursHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05