Husqvarna WG4815E, WG3613E manual Stopping, Emergency stop, Normal operating stop

Page 30

OPERATION

Hose the mower deck with water after each use. Hose especially underneath. Do not spray high pressure spray directly on top of spindles.

Avoid getting engine too wet.

WARNING

Never drive the machine on terrain that slopes more

than 10o.

Mow slopes up and down, never side-to-side. Avoid sudden directional changes.

8011-514

Clean mower deck after each use

Stopping

Emergency stop

Release both hands from the operate presence lever handles.

When both operator presence levers return to their outer position, the engine will quit and the mower will stop.

or

Pull both drive levers firmly against handle grips and hold them securely in place. Use thumbs to lift the neutral bail up into the neutral slot. Then stop engine by pulling throttle control back and shut off the key switch.

Normal operating stop

1.Pull both drive levers (traction levers) firmly toward the handle grips to stop forward motion.

2.Use thumbs to lift neutral bail into the neutral slots.

3.Move the throttle control to the slow position.

4.Move blade engagement control to the off position.

5.Move shift lever to the neutral position.

6.Stop engine, refer to “Stopping the Engine” on page 29.

IMPORTANT INFORMATION

Close fuel valve at the end of each mowing job.

English-28

Image 30
Contents WG4815E/968999120 WG3613E/968999117 Page OPERATOR’S Manual Mower WG3613E WG4815EEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Keep a safe Safety Instructions Safety InstructionsGeneral Use Age of the user Driving on Slopes Do as followsDo not Children Maintenance Use protective glasses at maintenance work Transport Customer responsibilitiesControls ControlsControl Locations Ignition Switch Recoil Starter GripMotion control levers Operator Presence LeversGear shift lever Neutral BailParking Brake Blade Engagement Lever USE Full Throttle When Mowing , forThrottle Control and Choke Control Choke ControlRefueling Accessories Fuel Shut-off ValveClose fuel valve at the end of each mowing job Operation OperationBefore Starting Starting the Engine Fuel shut-off valve, Open Presence lever Gearbox RunningReversing To operate on hillsMowing Tips Mowing patterns Stopping Emergency stopNormal operating stop Stopping the Engine Adjustment of cutting height It may be necessary to readjust drive and brake linkagesSpacers Height Caster arm Under cutter Housing Cutting height table Axle Spacers Blade PositionAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance MaintenanceMaintenance Schedule 300 Ignition System Checking the Safety System Functional checkChecking and Adjusting Throttle and Choke Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Checking the Parking Brake Checking the V-beltsDeck belt Brake Rod Adjustment Checking the BladesUnder side of rear deck Cleaning and Washing Caster WheelsHardware Blade replacement Lubrication LubricationLubrication Schedule Front Wheel Mount Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel BearingsChanging the Oil Filter Engine oil Changing the Engine OilChecking the Oil Level Drive wheel idle arm, right and left CouplingMower deck lever Rear wheel Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-52 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data Technical dataWG3613E WG4815E Torque Specifications Overall dimensionsConformity Certificates USA requirementsDelivery Service Service JournalService Journal After the First 8 HoursHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05