Husqvarna WG4815E, WG3613E manual At Least Once Each Year

Page 65

SERVICE JOURNAL

Action

Date, mtr reading, stamp, sign

At Least Once Each Year

1.Clean the engine’s cooling air intake (25 hours).

2.Replace the air cleaner’s pre-filter (foam) (300 hours).

3.Replace the air filter’s paper cartridge (200 hours).

4.Change the engine oil (100 hours).

5.Replace the engine oil filter (200 hours).

6.Check/adjust the cutting height.

7.Check/adjust the parking brake (50 hours).

8.Clean/Change the spark plugs (100 hours).

9.Change the fuel filter (100 hours).

10.Clean the cooling fins (100 hours).

11.Check the play in the engine valves (300 hours).

12.Perform the 300-hour service at an authorized service workshop.

English-63

Image 65

Contents WG4815E/968999120 WG3613E/968999117 Page WG3613E WG4815E OPERATOR’S Manual MowerEnglish-2 Introduction IntroductionManufacturing Number Good ServiceXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Symbols and DecalsSymbols and Decals Keep a safe General Use Safety InstructionsSafety Instructions Age of the user Do not Driving on SlopesDo as follows Children Maintenance Use protective glasses at maintenance work Customer responsibilities TransportControl Locations ControlsControls Recoil Starter Grip Ignition SwitchOperator Presence Levers Motion control leversParking Brake Gear shift leverNeutral Bail Throttle Control and Choke Control USE Full Throttle When Mowing , forBlade Engagement Lever Choke ControlRefueling Close fuel valve at the end of each mowing job AccessoriesFuel Shut-off Valve Before Starting OperationOperation Starting the Engine Fuel shut-off valve, Open Presence lever Running GearboxMowing Tips ReversingTo operate on hills Mowing patterns Normal operating stop StoppingEmergency stop Stopping the Engine It may be necessary to readjust drive and brake linkages Adjustment of cutting heightCutting height table Axle Spacers Blade Position Spacers Height Caster arm Under cutter HousingAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance Schedule MaintenanceMaintenance 300 Ignition System Functional check Checking the Safety SystemChecking the Engines Cooling Air Intake Checking and Adjusting Throttle and Choke CableReplacing the Air Filter Checking Tire Pressures Replacing the Fuel FilterChecking the Fuel Pump’s Air Filter Deck belt Checking the Parking BrakeChecking the V-belts Under side of rear deck Brake Rod AdjustmentChecking the Blades Hardware Cleaning and WashingCaster Wheels Blade replacement Lubrication Schedule LubricationLubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesFront Wheel Mount Front Wheel BearingsEngine oil Changing the Engine Oil Changing the Oil FilterChecking the Oil Level Mower deck lever Drive wheel idle arm, right and leftCoupling Rear wheel Problem Cause Trouble Shooting GuideTrouble Shooting Guide English-52 Storage ServiceStorage Winter StorageWiring diagrams Wiring DiagramsWG3613E WG4815E Technical DataTechnical data Overall dimensions Torque SpecificationsUSA requirements Conformity CertificatesService Journal Service JournalDelivery Service After the First 8 HoursHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05