Husqvarna WG4815E, WG3613E manual Rear wheel

Page 52

LUBRICATION

9. Rear wheel

Lubricate with a grease gun, one zerk for each rear wheel, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

IMPORTANT INFORMATION

Be spartan and remove excess lubricant so that is does not come into contact with belts.

10. Brake Arms

Lubricate with a grease gun, one zerk for each brake arm, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

IMPORTANT INFORMATION

Be frugal and remove excess lubricant so that is does not come into contact with the brake band.

8011-716

Lubricating rear wheel

8011-493

Lubricating brake arms

English-50

Image 52

Contents WG4815E/968999120 WG3613E/968999117 Page OPERATOR’S Manual Mower WG3613E WG4815EEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Keep a safe Safety Instructions Safety InstructionsGeneral Use Age of the user Do as follows Driving on SlopesDo not Children Maintenance Use protective glasses at maintenance work Transport Customer responsibilitiesControls ControlsControl Locations Ignition Switch Recoil Starter GripMotion control levers Operator Presence LeversNeutral Bail Gear shift leverParking Brake USE Full Throttle When Mowing , for Throttle Control and Choke ControlBlade Engagement Lever Choke ControlRefueling Fuel Shut-off Valve AccessoriesClose fuel valve at the end of each mowing job Operation OperationBefore Starting Starting the Engine Fuel shut-off valve, Open Presence lever Gearbox RunningTo operate on hills ReversingMowing Tips Mowing patterns Emergency stop StoppingNormal operating stop Stopping the Engine Adjustment of cutting height It may be necessary to readjust drive and brake linkagesSpacers Height Caster arm Under cutter Housing Cutting height table Axle Spacers Blade PositionAxle Spacers Blade Cutting Position Moving machine by Hand Maintenance MaintenanceMaintenance Schedule 300 Ignition System Checking the Safety System Functional checkChecking and Adjusting Throttle and Choke Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Checking the V-belts Checking the Parking BrakeDeck belt Checking the Blades Brake Rod AdjustmentUnder side of rear deck Caster Wheels Cleaning and WashingHardware Blade replacement Lubrication LubricationLubrication Schedule Lubricating the Cables Lubricating in Accordance with the Lubrication ScheduleFront Wheel Mount Front Wheel BearingsChanging the Oil Filter Engine oil Changing the Engine OilChecking the Oil Level Coupling Drive wheel idle arm, right and leftMower deck lever Rear wheel Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-52 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramsTechnical data Technical DataWG3613E WG4815E Torque Specifications Overall dimensionsConformity Certificates USA requirementsService Journal Service JournalDelivery Service After the First 8 HoursHour Service English-60 English-61 English-62 At Least Once Each Year 106457R0108/11/05