Husqvarna LZ7230, LZ6127 manual Running, Mower deck’s gauge wheels should be evenly adjusted

Page 32

OPERATION

Running

1.Release the parking brake by moving the lever downward.

Your mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

2.Move the steering controls to the neutral position (N).

3.Select the cutting height by placing the peg in the corresponding hole for desired height. Lock the peg in place on the inside with the pin.

4.Squeeze the lock handle up to the lifting lever while moving the lever forward to meet the set peg.

5.Make sure the work area is free from objects that could be thrown by the rotating blades.

IMPORTANT INFORMATION

The mower deck’s gauge wheels should be evenly adjusted.

6.Engage the mower deck by pulling out the blade switch.

7.Move throttle control to full throttle.

8.The machine’s speed and direction are continuously variable using the two steering controls. When both controls are in the neutral position, the machine stands still.

By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively.

WARNING!

Ensure that no one is near mower when engaging blade switch.

8011-511-1

Released parking brake

8011-561

Select the cutting height

8011-510

Engaging the mower deck

English-32

Image 32
Contents Operator Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and Decals Important InformationRemove key before General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Or into anything. If necessary, make repairs Transport Customer responsibilitiesRoll over Protection system Rops Spark ArrestersControls ControlsMotion Control Levers Parking Brake Hour meterTracking knob Fuses Blade switchIgnition Switch Refueling Fuel shut off valve Seat adjustment leverSeat Lock Lifting Lever for the Mower Deck Choke controlThrottle control Pump release valves AccessoriesCutting height lift pedal Operation OperationTraining SteeringStarting the Engine Roll bar and safety beltBefore Starting Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing no choke To remove cables, reverse order To start an engine with a weak batteryTo attach jumper cables Mower deck’s gauge wheels should be evenly adjusted RunningOperating on hills Mowing Tips Stopping the Engine Moving by HandMaintenance Least Hours Once Maintenance Before After EachDaily Weekly 25 50 100100 300 Replacing battery BatteryTo clean battery and terminals Safety System Ignition SystemSafety system Choke Cable Engine Cooling Air IntakeThrottle Cable Dust cap Air filter housing and filterAir Filter Engine Oil Cooler Fuel Filter Fuel Pump Air FilterTo replace deck belt Checking the V-beltsDeck belt Checking the Parking Brake Pump beltChecking Tire Pressures Blade replacement Checking the BladesLeveling Adjusting the Mower DeckAdjusting Cutting Height Cleaning and Washing Removal and installation of caster wheelCaster Wheels HardwareLubrication Lubrication ScheduleLubricating with Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeMower Deck Height Adjuster Throttle and Choke Cables, Lever BearingsFront Wheel Mount Front Wheel BearingsChanging the Oil Filter Steering Control ShaftsMower Deck Struts Troubleshooting Guide Problem CauseEnglish-58 Winter Storage ServiceStorage Wiring Diagrams For unit produced before Serial NoTransmission Technical DataLZ5227 LZ6127 Engine Productivity Overall DimensionsLZ5227 Z6127 LZ6130 LZ7230 Engine LZ6130C LZ7230C LZ6130 LZ7230 LZ30 LZ30CTorque Specifications CE requirements Conformity CertificatesConformity Certificates USA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 Warranty Statement 539 131254 R01 08/23/07