Network Setting (Windows)
•If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1. In T ree Name and Context Name , enter the tree and context name of the print server . Do not
exceed 255 characters for the context name.
2. In Print Server Name , enter the name of the print server created in Specifying NetW are
Print Services . (→P .561)
3. In Print Server Password , enter the password of the print server created in Specifying
NetW are Print Services . (→P .561)
4. In Polling Interval , specify the interval at which the printer checks the NetW are print queue.
•If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1. In Print Server Name , enter the advertising name of the print server created in Specifying
NetW are Print Services . (→P .561) Usually , the advertising name is the same as the name of
the print server .
2. In Printer Number , enter the same printer number specied in Specifying NetW are Print
Services . (→P .561)
1 1. Click OK to display the Network page.
12. Click Reset to activate the settings.
For a list of NetW are protocol settings items, see “Conguring the Printer ’ s NetW are Network Settings”.
(→P .557)
Note
•If you use RemoteUI to display the print log in RPrinter or NPrinter mode, the document and user
information cannot be obtained. Thus, Document Name only indicates Unknown , and the User Name
information is identied as RPRINTER/NPRINTER .
Network Setting 565