Network Setting (Macintosh)
Conguring the Destination for AppleT alk Network(Macintosh)
T o print over an AppleT alk network, activate the AppleT alk protocol and congure the destination as follows.
Activating AppleT alk on the printer
Important
•By factory default, the AppleT alk protocol is disabled on the printer .
1. Press the Menu button to display MAIN MENU .
2. Press ▲or ▼to select Interface Setup , and then press the ►button.
3. Press ▲or ▼to select AppleT alk , and then press the ►button.
4. Press ▲or ▼to select On , and then press the OK button.
5. Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•By using RemoteUI , you can also specify the object name used by AppleT alk, as well as the printer
zone name.
For details on RemoteUI , see “Using RemoteUI”. (→P .555)
Important
•Be sure to complete step 3. This will activate the values you have entered.
574 Network Setting