15.Switch the position of Bottom hinge and Leg. (Right
Assemble the Hinge Low after putting the Freezer Door in the middle hinge.
•Disassemble the Guide auto close and the
•Assemble the
17.Switch the
16.Put the
Remove the Screw and disassemble the Cover control (2), Switch the Wire door (3) direction to opposite side on Fridge Door (Door Display type only).
Assemble the
(1) |
18.Use 11 mm wrench to separate the Top hinge shaft.
Flip the Top hinge and reattach the Top hinge shaft.
Flip the Top hinge and reattach the Top hinge shaft and nut. (Only for RB33N*, RB34N*, RL33N* model)
Tighten the shaft (and nut) as much as possible using a wrench.
19.Insert the Top hinge to make the hole a little bigger and then put out the Top hinge to assemble the Fridge door.
operating02
(2)
(3)
(4)
Assembly steps
1. Assemble the Top hinge on the Fridge door.
2. Assemble the Middle hinge on the Fridge door.
3. Insert the Top Hinge on the Cabinet.
4. Assemble the screw.
operating _29
2018. 2. 2. �� 9:16 |