LEVELLING THE REFRIGERATOR

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

Case 1) The appliance tilts down to the left.

Turn the left adjusting leg in the direction of the arrow until the appliance is level.

Case 2) The appliance tilts down to the right.

Turn the right adjusting leg in the direction of the arrow until the appliance is level.

INSTALLING THE HANDLES (APPLICABLE MODELS ONLY)

The handles are included in the product package.

1.Align each screw hole of the handle to the corresponding screw hole of the door.

Then, insert the provided screws (x2) and use a Phillips screwdriver to tighten them.

< Case2 >

< Case1 >

2. Insert the Cap-Handle Screws (x2) into each handle hole on both sides.

Cap-Handle screw

3. Repeat the steps above to install the handle on the other freezer or fridge door.

4. Insert the Cap Screws (x2) into the door holes of the opposite side of the door where no handle is installed.

Cap screw

Use caution when installing the handle.

CAUTION The door may be scratched.

18_ setting up

DA68-02833Q-18.indb 18

2018. 2. 2. �� 9:15