Basic position

Position reversed

10.Remove the Cap Handle and the Screws by Flat-Head (-) screwdriver.

(1)(2)

12.Switch the position of cap screw and cap. Pull out using a thin flat screwdriver.

(1)

(3)

 

(2)

Remove the Cap by Flat-Head (-) screwdriver and assemble the Handle and Cap-Handle.

If the handle is not installed, skip steps 10 and 11 because they are not applicable. Availability of these steps depends on the model.

Be careful the Scratch, when

CAUTION disassembling the Cap.

11. Assemble the Cap.

Be careful not to injure yourself during CAUTION operation.

13.Lay the refrigerator carefully on it’s back. Remove the leg (unscrew in an anti-clockwise direction) and the Hinge Low.

Hinge Leg

Hinge Low

To protect the refrigerator damage, cut a large section of the cardboard carton and place it under the refrigerator.

14.Assemble the Middle hinge using the Phillips Head (+) screwdriver. (Assemble Washer upwardly before assembling Middle hinge.)

Washer (optional)

28_ operating

DA68-02833Q-18.indb 28

2018. 2. 2. �� 9:16