REMOVING THE INTERIOR PARTS

When assembling, put fridge shelves in CAUTION the correct position and do not put them

upside down. It may cause a personal injury or material damage.

When you put the shelves back, make sure the side with the label “Front” on it face the front of the refrigerator.

Shelves

Gently lift up the shelves with both hands and pull it toward you. (Glass shelf)

Do not put the

CAUTION shelves upside down or backwards. There is a risk of falling.

Door guards

Firmly grab the door guards with both hands and lift it up gently to remove the door guards.

Water tank

Lift up the Can Carry and then firmly grab the water tank with both hands and lift it up towards you gently to remove the water tanks.

Water tank may not be available depending on the model.

Drawers

Pull the drawers out fully then slightly lift it up to remove the drawers.

•If the drawers get

stuck to door, remove drawer by lifting up after remove shelves.

Do not use Benzene, Thinner or Clorox™

operating02

CLEANING THE REFRIGERATOR

 

WARNING for cleaning.

 

They may damage the surface of the

 

appliance and can create a risk of fire.

 

Do not spray the refrigerator with water CAUTION while it is plugged in, as it may cause

an electric shock. Do not clean the refrigerator with benzene, thinner or car detergent for risk of fire.

1.Unplug the power cord of the refrigerator.

2.Slightly dampen a soft lint-free cloth or paper towel with water.

Do not use any kind of detergent to clean the refrigerator because that can discolor or damage the refrigerator.

3.Wipe the inside and outside of refrigerator until it is clean and dry.

4.Plug the power cord of the refrigerator.

When water dispenser do not come out water, push on top of the water tank down slightly.

REPLACING THE LED LAMP

When the interior or exterior LED lamp has gone out, do not disassemble the lamp cover and LED lamp by yourself.

Please contact your service agents.

operating _25

DA68-02833Q-18.indb 25

2018. 2. 2. �� 9:16