34CHAPTER 1: SWITCH 7750 COMPONENTS
Figure 30 Switch 7750 PoE Power Supply
The Switch 7750 supports PoE external input power up to 2400 W.
Table 45 describes the capabilities of the Switch 7750 PoE power module.
Table 45 PoE Power Modules
| Power supplied | Power modules | |
|
|
| needed for |
Input voltage | 1 Power module | 2 Power module | redundancy |
|
|
|
|
100 to 140 V | 1200 W | 2400 W | 3 |
200 to 240 V | 2400 W |
| 2 |
|
|
|
|
| The Switch 7750 provides power through Ethernet ports on the |
| modules, supporting the maximum distance of 100 m (328 ft.). |
| When the Switch 7750 provides power remotely, each Ethernet port can provide |
| up to 15.4 W of power to the connected PD. |
|
|
Fan Assembly | The fan assembly consists of two to four individual fans and is located on the right |
| side of the chassis: |
| ■ |
| ■ |
| ■ |
| The fans are directly connected to the backplane through connectors. Fan |
| operation fault signals are collected and transmitted to the system alarm board |
| through the backplane. |
| Figure 31 illustrates the fan assembly for the 7- and |