Booting the Switch 7750 53
Powering up and Turn on the power for the Switch 7750 and run the BootROM program. The Booting terminal displays the following information:
Starting......
RAM Line....OK
System is booting.....................
******************************************
* |
|
| * |
* Switch 7750 BOOTROM, Version 300 | * | ||
* |
|
| * |
****************************************** | |||
Copyright(C) | |||
Creation date: Mar 25 2003, 09:33:05 |
| ||
CPU type | : MPC8260 |
|
|
CPU Clock Speed : 200Mhz |
|
| |
BUS Clock Speed : 66Mhz |
|
| |
Memory Size | : 256MB |
|
|
FAB64 self testing |
|
| |
60X_SDRAM Data lines Selftest | OK! | ||
60X_SDRAM Address lines Selftest | OK! | ||
60X_SDRAM fast selftest | OK! | ||
Please check LEDs | LEDs selftest finished! | ||
Switch chip selftest |
| OK! | |
CPLD selftest |
| OK! | |
The switch Mac address is | 00E0.FC00.7505 | ||
Press Ctrl+B to enter Boot Menu... | 5 |
| |
To enter Boot Mode (see Chapter 6), press Ctrl+B during the 5 seconds that “Press Ctrl+B to enter Boot Menu...5” is displayed. To perform decompression immediately, press ESC while this message is displayed. If you do nothing, the system enters the following
| |
Auto booting file is sw7750001.app |
|
There are 2 files in this packet |
|
FAB64 app file <<FAB64001.app>> is... | OK |
Decompress |
|
Image | |
....................................................................
....................................................................
....................................................................
..............OK!
Starting at 0x60000...
User interface Aux0 is available
