22CHAPTER 2: INSTALLING THE SWITCH
procedura di manutenzione, leggere le informazioni di sicurezza riportate nell'Appendice A della presente guida per l'utente.
Package Contents | ■ | Switch unit |
| ■ | |
| ■ Getting Started Guide (this guide) | |
| ■ Management Quick Reference Guide | |
| ■ | Release Notes |
| ■ | Warranty Information |
| ■ | Power Adapter |
| ■ Console Cable | |
| ■ | Stacking Clip |
| ■ 4 x Rubber feet | |
|
| |
Choosing a Suitable | The Switch is suited for use on a desktop, either free standing, stacked | |
Site | together with other units using the stacking clip, or mounted on a wall. | |
| Alternatively, the Switch can be placed in a wiring closet or equipment | |
| room, as an aggregator for other Hubs and Switches. A stacking kit | |
| containing one mounting clip is supplied with the Switch. | |
CAUTION: Ensure that the ventilation holes are not obstructed.
When deciding where to position the Switch, ensure that:
■Cabling is located away from:
■sources of electrical noise such as radios, transmitters and broadband amplifiers.
■power lines and fluorescent lighting fixtures
■The Switch is accessible and cables can be connected easily.
■Water or moisture cannot enter the case of the Switch.
■Air flow is not restricted around the Switch or through the vents in the side of the Switch. 3Com recommends that you provide a minimum of 25mm (1in.) clearance.
