OfficeConnect Managed Switch 9 and Switch 9 FX | 3Com 3CR16709-91

C	TECHNICAL SPECIFICATIONS

OfficeConnect Managed Switch 9 and Switch 9 FX

Physical Dimensions	Height: 57.9 mm (2.3 in.)
	Width: 229 mm (9.0 in.)
	Depth: 185.4 mm (7.3 in.)
	Weight: 1.0 kg (approx)

Environmental Requirements
Operating Temperature	0 ° to 50 °C (32 ° to 122 °F)
Storage Temperature	–40 ° to +70 °C (-40 ° to 158 °F)
Operating Humidity	10–95% relative humidity, non-condensing
Standards	EN60068 to 3Com schedule (Package testing: paras 2.1, 2.2, 2.30, and 2.32.
	Operational testing: paras 2.1, 2.2, 2.30 and 2.13).

Safety
Agency Certifications	UL60950-1, EN60950-1, CSA 22.2 No. 60950-1, IEC 60950-1

EMC
Emissions	CISPRR 22 Class A, EN55022 Class A, FCC Part 15 Subpart B Class A,
	ICES-003 Class A, AS/NZS 3548 Class A, EN61000-3-2, EN61000-3-3
Immunity	EN 55024

Heat Dissipation	15 watts maximum (51 BTU/hour maximum)

Power Supply
Power Inlet	12V DC ± 5%
	provided by in-line adapter
AC Line Frequency	50/60 Hz
Input Voltage Options	100–240 VAC
Current Rating	3.5 A (amps) (maximum)

Image 71

3Com 3CR16709-91, 3CR16708-91 manual OfficeConnect Managed Switch 9 and Switch 9 FX

Contents

3CR16708-91 3CR16709-91 United States Government Legend 3Com Corporation Campus Drive Marlborough, MA USA Contents Setting UP for Management Outs Problem SolvingPage About this Guide Convention Description ConventionsIcon Description Documentation RelatedDocumentation Pddtechpubscomments@3com.com Comments Introducing Hardware Features Switch Alert LED Power LED Port Status Leds PoE Status Leds Switch Front View Detail Color Indicates 10BASE-T/100BASE-TX Port Status LEDs SFP Module Status LED Switch 9 FX only100BASE-FX Port Status LEDs Switch 9 FX only Alert LED LED Switch 9 rear view Switch Rear View Detail Switch Rear View Detail Page Default Settings shows the default settings for the Switch Page Installing the Switch Site Package ContentsChoosing a Suitable Air temperature around the Switch does not exceed 50 C 122 F Instructions for Cement Walls Wall-mountingUpwards Mounting Make two holes 150 mm 5.9 in. apart Instructions for Wood Walls Color State Power and Alert LED colors Power-up Sequence Cross-over Cable Straight-through Cable SFP Operation Installing the Switch Inserting a SFP Transceiver Installing the Switch Setting UP for Management Overview Setting UpConfigure IP information manually for your Switch or view Automatically configured IP information Automatic IP Configuration Manual IP Configuration Setting UP for Management Pre-requisites Manually Configuring IP Information Connecting a workstation to the Switch via the console port Connecting the Workstation to the Switch Example top-level command line interface menu Setting Up the Switch with IP Information Automatically Configured IPViewing Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Methods of Managing a Switch Refer to Setting Up Web Interface Management on Refer to Setting Up Command Line Interface Management on CLI Management via Command LineNetwork Using Telnet Interface Management Choosing a Browser Setting Up WebInterface Management workstation Setting Up SnmpManagement Protocol Snmp can manage a Switch if Over the Network User Default Name Password Access Level Default Users Default Users and Passwords Setting UP for Management Problem Solving Indicated by LEDs Solving Problems Solving Hardware ProblemsRefer to the list of suggested solutions below How do you obtain a registered IP Address? Solving Communication ProblemsIP Addressing Solving Software Upgrade Problems Problem Solving Safety Information This must be approved for the country where it is used Power Cord Set Japan Important Safety Information Important Safety Information Schko ’information de Sécurité Importante ’information de Sécurité Importante Vorsicht Europe Wichtige Sicherheitsinformationen Información de seguridad importante Schuko Dispositivo Láser DE Clase CSA Importanti Informazioni di Sicurezza Avvertenza porte a fibre ottiche Protezione degli occhi Appendix a Safety Information Panel. The pinout is shown below RJ-45 Pin Signal DB-9 Pin DirectionRJ-45 to RS-232 Adapter Cable Pin Number ConnectorsRJ-45 Pin Assignments OfficeConnect Managed Switch 9 and Switch 9 FX Terminal Emulation Protocols Used for AdministrationStandards Supported Purchase ServicesRegister Your Product Downloads Access SoftwareTroubleshoot Online Contact Us US and Canada Telephone Technical Support and Repair Country Telephone NumberLatin America Telephone Technical Support and Repair Index Snmp Regulatory Notices