3Com 3CRWEASY96A Regulatory Compliance Information, 3Com Wireless LAN Outdoor Bridge Solution

Models: 3CRWEASY96A

1 50
Download 50 pages 455 b
Page 46
Image 46

REGULATORY COMPLIANCE INFORMATION

3Com Wireless LAN Outdoor Bridge Solution

FCC Radio-Frequency Exposure Notice

This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, this equipment has to be installed and operated while maintaining a minimum body to antenna distance of 2 meters.

This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals. This product must be installed by a professional technician/installer.

FCC Part 15 Notice (Applicable to Use Within the USA)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet prepared by the Federal Communications Commission helpful:

The Interference Handbook

This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4.

Manufacturer’s Declaration of Conformity

3Com Corporation

5500 Great America Parkway P.O. Box 58145

Santa Clara, CA 95054-8145 (408) 326-5000

Declares that the product:

Date:

13 December 2002

Brand Name:

3Com Corporation

Model Number:

WL-306B

Equipment Type:

Wireless LAN Building-to-Building Bridge

Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 46
Image 46
3Com 3CRWEASY96A manual Regulatory Compliance Information, 3Com Wireless LAN Outdoor Bridge Solution