3Com 32x, 52x manual Mounting, 1Rack-Mount Kit Contents

Mounting 1-3

Mounting	You can mount your bridge/router on a tabletop, stack it, or mount it
	in a rack.

Rack-Mount Kit The rack-mount kit contains the following hardware:

Two rack-mount brackets

Six M4x10 mm Phillips flathead

machine screws for use with rack-mount brackets

Two stacking brackets

Four M4x8 mm Phillips panhead screws for use with stacking brackets

Four adhesive-backed

rubber feet

Figure 1-1Rack-Mount Kit Contents

Installing on a If you plan to install your Tabletop bridge/router on a tabletop, attach

the rubber feet as shown.

Attach feet to corners

of chassis bottom

Flex plastic sheet until

feet pop loose