
LED Meanings 
Table 4-2 System Software Load Errors (continued)
Status LEDs  | 
  | 
  | 
  | 
  | ||
1  | 2  | 3  | 4  | Load LED  | Power/Fault LED  | Meaning and Action  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
On  | On  | On  | On  | On  | Yellow  | Write to Flash File System failed.  | 
  | 
  | 
  | 
  | 
  | 
  | Call your network supplier for assistance. | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
LED Meanings | Table   | |||
  | 
  | bridge/router.  | 
  | |
Table  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | Associated | 
  | 
  | 
  | 
Model No. | Connector | 
  | LED | Meaning | 
  | 
  | 
  | 
  | |
323, 327,  | Unshielded twisted  | 16 MB  | The system is either attempting to enter or has successfully  | |
or 52x  | pair (UTP) or shielded  | 
  | entered the token ring at the rate of 16 MB. This LED will not  | |
  | twisted pair (STP)  | 
  | light if the system is either attempting to enter or has  | |
  | 
  | 
  | 
  | successfully entered the token ring at the rate of 4 MB.  | 
  | 
  | 
  | 
  | 
  | 
323, 327,  | UTP or STP  | 
  | Active  | The system is transmitting or receiving traffic.  | 
or 52x  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
323, 327,  | UTP or STP  | 
  | Fault  | The system is experiencing a problem with the token ring  | 
or 52x  | 
  | 
  | 
  | connection. This LED resets if you reboot the system.  | 
  | 
  | 
  | 
  | |
52x  | ISDN (D channel)  | Line Act  | The ISDN line is activated.  | |
  | 
  | 
  | 
  | |
52x  | ISDN (D channel)  | Line Error  | Indicates a disconnected cable, or a loss of phantom power.  | |
  | 
  | 
  | 
  | 
  | 
52x  | ISDN B1, B2  | 
  | Link  | The path using B1 or B2 is up.  | 
  | 
  | 
  | 
  | 
  | 
52x  | ISDN B1, B2  | 
  | Connect  | An   | 
  | 
  | 
  | 
  | 
  | 
52x  | ISDN B1, B2  | 
  | Fault  | An error in the received frames is detected.  | 
  | 
  | 
  | 
  | |
All  | V.35, Universal, or  | Link  | The path is up.  | |
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | |
All  | V.35, Universal, or  | Active  | A physical connection to an active device has been established.  | |
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | |
All  | V.35, Universal, or  | Fault  | An error in the received frames is detected.  | |
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Status  | Provides additional status for the Run, Load, and Test LEDs.  | 
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Run  | The system software has successfully loaded and started running.  | 
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Load  | The system software is being loaded.  | 
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Test  | The system is executing   | 
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Fwd  | A packet is being forwarded between any two ports.  | 
  | 
  | 
  | 
  | 
  | 
All  | Not applicable  | 
  | Power/  | When the LED is green, the system has power and is  | 
  | 
  | 
  | Fault  | operational. When the LED is yellow, a problem is preventing  | 
  | 
  | 
  | 
  | normal operation.  | 
  | 
  | 
  | 
  | 
  |