3Com 52x, 32x manual 4CHAPTER 1 Installing the Hardware

1-4CHAPTER 1: INSTALLING THE HARDWARE

Stacking with The stacking brackets can be used to securely stack several Brackets bridge/routers on a tabletop. Use the stacking brackets and the

M4x8 mm panhead stacking screws shown in Figure 1-1.

Attach brackets as shown to lock two units together

Place screws in holes as shown

Bottom bracket acts as a support

Installing in a Rack To install the bridge/router in a rack, use the rack-mount brackets and the M4x10 mm flathead rack-mount screws shown in Figure 1-1 and follow these steps:

1Secure the rack-mount brackets to each side of the chassis using three flathead screws per bracket.