CAUTION: Make sure you do not accidentally alter the dip switch settings when you remove the cover.
Dip switches should all be in the down position
Installing Memory To install the flash memory and/or DRAM SIMM, follow these steps:
1With the chips facing toward the back of the bridge/router, place the silver connector edge of the SIMM into the appropriate SIMM socket at almost a
2Align the semicircular notch with the ridge in the SIMM socket. Do not force the SIMM. It can be installed in only one direction.
3Once the SIMM is aligned, gently push down on the outer corners of the SIMM until it snaps into place.
1
2
End view
Flash slot
DRAM slot
CAUTION: Before continuing with the next section, be sure that all screws and pins are properly seated and the dip switches are properly aligned.
