Jack Field Wiring Supplement

A jack field is a group of jacks at the control unit location that serves as a point of administration for telephone wiring. This section tells you how to construct a jack field and how to extend the network interface provided by the local telephone company to the jack field. Also, this section describes the hardware designed specifically to ensure the following:

A neat, reliable, and durable wire installation

Easy rearrangement, changes, and upgrades to your MERLIN Plus System

Simple line swapping and maintenance strategy

A permanent wiring run between the voice terminal and the control unit should be installed for each voice terminal. Also, we recommend that you plan and install wiring for future voice terminal locations. To install voice terminal wiring, follow the instructions in the procedure "Constructing and Connecting the Jack Field."

If the local telephone company provided a network interface that is far removed from the control unit location or an RJ21-type multiline network interface, you should extend the network interface to the jack field. Follow the instructions in the procedure "Extending the Network Interface to the Jack Field." See Figure 37 for a typical complete wiring installation.

If all necessary wiring is in place, go back to the beginning of this manual and read "Step 1: Installing the Control Unit," and follow the instructions.

FIGURE 37 A complete wiring installation.

44Jack Field Wiring Supplement

Page 48
Image 48
3Com RELEASE 2 installation manual Jack Field Wiring Supplement, Complete wiring installation